The car just drove out of Yiming's compound, Zhao Yongjun rubbed his temples and gave Qian Haiyang advice: "Director Qian! I suggest that our factory report on it and apply to negotiate with Yiming's merger project."
"Why?" Qian Haiyang was surprised when he heard these words. He looked at the old man Zhao Yongjun next to him and asked curiously.
Another gray-haired old man was also surprised: "Old Zhao! Our factory is currently doing pretty well. Why do we need to restructure? Restructuring is also possible. Why should we sell it to the private company Yiming?"
Neither of them understood why Zhao Yongjun wanted to say this?Besides, after the restructuring, where can Zhao Yongjun go to work?With these questions in mind, Qian Haiyang and others looked at Zhao Yongjun, who was slightly squinted in surprise.
"Hey... because Yiming has already developed a domestic servo motor! If our factory can get on this downwind boat, there will be a future in the future. Otherwise, it will close and stop production in a few years!"
At this time, Zhao Yongjun sighed and slowly opened his eyes, his eyes weak and helpless.
"You said that Yiming has made domestic servo motors? How is it possible? So many research institutions across the country have not developed them. How can a private enterprise produce such cutting-edge products?"
"I think it's possible! The dust-free workshop they set up is very large, and it should be the production of servo motors. Their company was willing to provide servo systems to cooperative units at first, but now they are unwilling. This is a strange thing!"
After listening to Zhao Yongjun's words, Director Qian and others disagreed and all expressed their opinions.
Seeing this scene, Zhao Yongjun sorted out all the information he had collected, and then analyzed them one by one for everyone.At the end, he slowly said:
"Yiming is selling second-hand servo motors. Those second-hand servo motors look the same as new ones. Obviously, their company is capable of repairing and refurbishing servo motors! After mastering this technology, they are only one step away from producing servo motors by themselves! "
"Yeah... this thing is really possible!"
Qian Haitao slapped his thigh suddenly, exclaiming with perfect eyesight.
As soon as he was going to return to Jiujiang City, he immediately met the second boss and reported on the project of Yiming Company as the focus.
...
...
At the same time, a large technical seminar is being held in Yiming's large conference room.The Sun Chao team, Hong Aiguo team, Meng Haisheng team and Zheng Cheng team from the technical department, and all members of the backbone R&D team attended the meeting.
Xu Zhenming sat in the main seat and glanced at everyone: "Colleagues! Our company's servo motor project has made breakthrough progress, and it is only one step away from the finalization of the product. However, this step is very difficult, and some The business may take several years. We can't wait for that long..."
He told everyone about his concerns: Once the servo motor manufacturer knows that Yiming Company is researching and developing servo motors, they may terminate the supply of servo motors to Yiming Company.At that time, Yiming's business will be very dangerous, and the company may close its doors.
"what should we do?"
At the end, he watched everyone put forward the topics to be discussed today.
"I suggest: Our company should be self-reliant and solve the servo motor supply problem by itself!"
"Lao Hong is very reasonable! The living can still be suffocated by urine? We can do our own development!"
"It is more difficult to develop ourselves! The materials are not as good as others, and the mechanical processing level is not as good as others, what should we do?"
The atmosphere in the conference room was very warm, and everyone was quite excited and expressed their opinions.
They all agreed: Think Yiming currently has the ability to develop servo motors independently, so why bother relying on others?
They have such ambitions, Xu Zhenming is very happy.
He opened a PPT document with the mouse and displayed the technical analysis document he made on the large projection screen.Immediately, he pointed to the pattern of the document and said:
"Colleagues! At present we are facing three problems, permanent magnet material, coil material and rotor system accuracy, etc.. As long as we solve these three problems, the performance of our company's servo motor can meet the technical requirements. At present, we have What problem does the ability solve by itself?"
"In my opinion, we can improve the machining accuracy of the rotor system to the extreme!"
"Yes! The material problem of permanent magnets is too complicated, involving all aspects, even a problem in the industrial chain, and it cannot be solved at all!"
"I think that in addition to mechanical processing, we can seek Hong Kong companies to solve the problem of coil materials! Hong Kong companies have many copper deep processing enterprises in Eastern Guangdong Province. They have the ability to produce qualified copper coils!"
Everyone resolved to participate and think of ways.Meng Haisheng, who has a lot of people and strength, and has a better understanding of the copper market, proposed to place orders for Hong Kong companies to purchase qualified coil materials.
This is also a good way!
After some discussion, Xu Zhenming believed that Yiming Company solved the problem of machining accuracy in the quickest and most reliable way.He then looked at Hong Aiguo, who was engaged in the research of CNC machine tools: "Group leader Hong, when can your team come up with high-precision CNC lathes and four-axis machining centers?"
With these two kinds of CNC machine tools, the accuracy of the servo motor rotor system can be greatly improved, and the performance parameters of the servo motor will be guaranteed.The technicians here all know this truth.
"Mr. Xu, dear colleagues! Our team is confident that we will come up with the test machine in half a month for the CNC lathes and machining centers!"
At this time, Hong Aiguo slapped his chest, assuring everyone present that he could take out these two newly designed CNC machine tools in a short time.
He didn't brag about this!
After Yiming merged with Nan'an Machine Tool Plant, dozens of technicians engaged in machine tool research were added, and there were also some machine tool base blanks that had been stored for several years.With the guarantee of some of these manpower and raw materials, Hong Aiguo's team can assemble a new type of CNC lathe and machining center as long as the drawings of the CNC machine tools that have been designed are turned into real objects.
These two types of CNC machine tools are not modified from general-purpose machine tools. The structure is very reasonable, the cumulative error of the mechanical system is small, and the accuracy of the CNC machine tools can be controlled between 0.01 mm and 0.05 mm.If so, these two brand-new CNC machine tools are completely comparable to those of Xiehong.
"Papa..."
After listening to Hong Aiguo's introduction, the technicians present all applauded excitedly.Everyone is technical, and of course he can understand the professional terms and technical parameters introduced by Hong Aiguo.The accuracy of machine tools has increased by an order of magnitude, and some countries will take more than ten years or even decades to tackle key problems.
If Yiming can manufacture CNC machine tools with a precision of 0.01 mm, it can be regarded as an increase in the accuracy of domestic CNC machine tools by an order of magnitude.The technological blockade by developed countries on the country would be a joke.
Of course, those foreign businessmen are very savvy. Once they find that there are high-precision CNC machine tools in China, they will greatly reduce the price of similar products to suppress domestic manufacturers.Yiming is enjoying this treatment.Adding one or two more products should not be a big problem.
Thinking of this, Xu Zhenming smiled slightly at Meng Haisheng and Qin Jinshui: "Honggong's team is going to come up with high-precision CNC machine tools in 15 days. When can your team finalize the drawings of the servo motors?"
He raised his whip violently, making all the technical teams nervous.
"Report to Mr. Xu that we will finalize the drawings of the servo motor within 15 days! Once we get the high-precision rotor system, we will begin to assemble the servo motor testing machine!"
Meng Haisheng was also unambiguous. He and Qin Jinshui made a military order on the spot, prepared to work overtime to discuss technical drawings, and finalized the drawings of three types of servo motors commonly used by Yiming Company.
Up to now, everyone is suffocating in their hearts, ready to use actual results to stop the boss Xu Zhenming's mouth.Lest the big boss always ask about time and nodes.
After determining the R&D nodes for CNC machine tools and servo motors, Xu Zhenming finally breathed a sigh of relief, and the sense of urgency in his heart was not so heavy.
At this time, Zheng Cheng, who was responsible for the research and development of the rectangular tube automatic drilling and blanking production line, smiled and proposed: "Mr. Xu! Members of our group have relatively weak experience in machine tool development. I request two secondments from Hong Gong’s group. A technician is here to help!"
What he said is very reasonable!
The rectangular tube automatic drilling and blanking production line is actually a large-scale CNC machine tool.The head of this machine tool is equipped with an electric hoist to assist in loading, and hoist the 12-meter-long rectangular tube onto the transport roller table.The rectangular tube can be drilled into the cutting machine tool at high speed through the roller transportation of the transportation roller table.
Before entering the worktable of the cutting machine tool, the angle of the rectangular tube needs to be adjusted through a centering device.This centering device is actually a kind of robot.The scientific name is the hug robot.
Through the calibration of the clamping robot, the rectangular tube can be drilled into the fixture of the cutting machine tool and cut by the flying saw.Then use a drill or punch to drill the rectangular tube.
In short, this production line involves many types of machine tools, which is a combined large-scale CNC machine tool.At present, no domestic company can produce such equipment.Auto companies that use this machine tool all use imported goods.
From this point of view, if Yiming can develop such a large-scale CNC machine tool, the market prospects must be very good!
However, Zheng Cheng's technical team is relatively weak. If you don't increase the number of people, it will be difficult to develop this product.
Thinking of this, Xu Zhenming smiled and nodded: "There are two ways to increase the number of technicians engaged in machine tool research. One way is to promote from within the company, and the other way is to hire retired engineers from Nan'an Machine Tool Plant! Minister Zheng, you How does it look?"
While questioning, he smiled and glanced around, looking at the technicians present.
He feels that today's meeting is very successful and will have a great impact on Yiming's future!
The car just drove out of Yiming's compound, Zhao Yongjun rubbed his temples and gave Qian Haiyang advice: "Director Qian! I suggest that our factory report on it and apply to negotiate with Yiming's merger project."
"Why?" Qian Haiyang was surprised when he heard these words. He looked at the old man Zhao Yongjun next to him and asked curiously.
Another gray-haired old man was also surprised: "Old Zhao! Our factory is currently doing pretty well. Why do we need to restructure? Restructuring is also possible. Why should we sell it to the private company Yiming?"
Neither of them understood why Zhao Yongjun wanted to say this?Besides, after the restructuring, where can Zhao Yongjun go to work?With these questions in mind, Qian Haiyang and others looked at Zhao Yongjun, who was slightly squinted in surprise.
"Hey... because Yiming has already developed a domestic servo motor! If our factory can get on this downwind boat, there will be a future in the future. Otherwise, it will close and stop production in a few years!"
At this time, Zhao Yongjun sighed and slowly opened his eyes, his eyes weak and helpless.
"You said that Yiming has made domestic servo motors? How is it possible? So many research institutions across the country have not developed them. How can a private enterprise produce such cutting-edge products?"
"I think it's possible! The dust-free workshop they set up is very large, and it should be the production of servo motors. Their company was willing to provide servo systems to cooperative units at first, but now they are unwilling. This is a strange thing!"
After listening to Zhao Yongjun's words, Director Qian and others disagreed and all expressed their opinions.
Seeing this scene, Zhao Yongjun sorted out all the information he had collected, and then analyzed them one by one for everyone.At the end, he slowly said:
"Yiming is selling second-hand servo motors. Those second-hand servo motors look the same as new ones. Obviously, their company is capable of repairing and refurbishing servo motors! After mastering this technology, they are only one step away from producing servo motors by themselves! "
"Yeah... this thing is really possible!"
Qian Haitao slapped his thigh suddenly, exclaiming with perfect eyesight.
As soon as he was going to return to Jiujiang City, he immediately met the second boss and reported on the project of Yiming Company as the focus.
...
...
At the same time, a large technical seminar is being held in Yiming's large conference room.The Sun Chao team, Hong Aiguo team, Meng Haisheng team and Zheng Cheng team from the technical department, and all members of the backbone R&D team attended the meeting.
Xu Zhenming sat in the main seat and glanced at everyone: "Colleagues! Our company's servo motor project has made breakthrough progress, and it is only one step away from the finalization of the product. However, this step is very difficult, and some The business may take several years. We can't wait for that long..."
He told everyone about his concerns: Once the servo motor manufacturer knows that Yiming Company is researching and developing servo motors, they may terminate the supply of servo motors to Yiming Company.At that time, Yiming's business will be very dangerous, and the company may close its doors.
"what should we do?"
At the end, he watched everyone put forward the topics to be discussed today.
"I suggest: Our company should be self-reliant and solve the servo motor supply problem by itself!"
"Lao Hong is very reasonable! The living can still be suffocated by urine? We can do our own development!"
"It is more difficult to develop ourselves! The materials are not as good as others, and the mechanical processing level is not as good as others, what should we do?"
The atmosphere in the conference room was very warm, and everyone was quite excited and expressed their opinions.
They all agreed: Think Yiming currently has the ability to develop servo motors independently, so why bother relying on others?
They have such ambitions, Xu Zhenming is very happy.
He opened a PPT document with the mouse and displayed the technical analysis document he made on the large projection screen.Immediately, he pointed to the pattern of the document and said:
"Colleagues! At present we are facing three problems, permanent magnet material, coil material and rotor system accuracy, etc.. As long as we solve these three problems, the performance of our company's servo motor can meet the technical requirements. At present, we have What problem does the ability solve by itself?"
"In my opinion, we can improve the machining accuracy of the rotor system to the extreme!"
"Yes! The material problem of permanent magnets is too complicated, involving all aspects, even a problem in the industrial chain, and it cannot be solved at all!"
"I think that in addition to mechanical processing, we can seek Hong Kong companies to solve the problem of coil materials! Hong Kong companies have many copper deep processing enterprises in Eastern Guangdong Province. They have the ability to produce qualified copper coils!"
Everyone resolved to participate and think of ways.Meng Haisheng, who has a lot of people and strength, and has a better understanding of the copper market, proposed to place orders for Hong Kong companies to purchase qualified coil materials.
This is also a good way!
After some discussion, Xu Zhenming believed that Yiming Company solved the problem of machining accuracy in the quickest and most reliable way.He then looked at Hong Aiguo, who was engaged in the research of CNC machine tools: "Group leader Hong, when can your team come up with high-precision CNC lathes and four-axis machining centers?"
With these two kinds of CNC machine tools, the accuracy of the servo motor rotor system can be greatly improved, and the performance parameters of the servo motor will be guaranteed.The technicians here all know this truth.
"Mr. Xu, dear colleagues! Our team is confident that we will come up with the test machine in half a month for the CNC lathes and machining centers!"
At this time, Hong Aiguo slapped his chest, assuring everyone present that he could take out these two newly designed CNC machine tools in a short time.
He didn't brag about this!
After Yiming merged with Nan'an Machine Tool Plant, dozens of technicians engaged in machine tool research were added, and there were also some machine tool base blanks that had been stored for several years.With the guarantee of some of these manpower and raw materials, Hong Aiguo's team can assemble a new type of CNC lathe and machining center as long as the drawings of the CNC machine tools that have been designed are turned into real objects.
These two types of CNC machine tools are not modified from general-purpose machine tools. The structure is very reasonable, the cumulative error of the mechanical system is small, and the accuracy of the CNC machine tools can be controlled between 0.01 mm and 0.05 mm.If so, these two brand-new CNC machine tools are completely comparable to those of Xiehong.
"Papa..."
After listening to Hong Aiguo's introduction, the technicians present all applauded excitedly.Everyone is technical, and of course he can understand the professional terms and technical parameters introduced by Hong Aiguo.The accuracy of machine tools has increased by an order of magnitude, and some countries will take more than ten years or even decades to tackle key problems.
If Yiming can manufacture CNC machine tools with a precision of 0.01 mm, it can be regarded as an increase in the accuracy of domestic CNC machine tools by an order of magnitude.The technological blockade by developed countries on the country would be a joke.
Of course, those foreign businessmen are very savvy. Once they find that there are high-precision CNC machine tools in China, they will greatly reduce the price of similar products to suppress domestic manufacturers.Yiming is enjoying this treatment.Adding one or two more products should not be a big problem.
Thinking of this, Xu Zhenming smiled slightly at Meng Haisheng and Qin Jinshui: "Honggong's team is going to come up with high-precision CNC machine tools in 15 days. When can your team finalize the drawings of the servo motors?"
He raised his whip violently, making all the technical teams nervous.
"Report to Mr. Xu that we will finalize the drawings of the servo motor within 15 days! Once we get the high-precision rotor system, we will begin to assemble the servo motor testing machine!"
Meng Haisheng was also unambiguous. He and Qin Jinshui made a military order on the spot, prepared to work overtime to discuss technical drawings, and finalized the drawings of three types of servo motors commonly used by Yiming Company.
Up to now, everyone is suffocating in their hearts, ready to use actual results to stop the boss Xu Zhenming's mouth.Lest the big boss always ask about time and nodes.
After determining the R&D nodes for CNC machine tools and servo motors, Xu Zhenming finally breathed a sigh of relief, and the sense of urgency in his heart was not so heavy.
At this time, Zheng Cheng, who was responsible for the research and development of the rectangular tube automatic drilling and blanking production line, smiled and proposed: "Mr. Xu! Members of our group have relatively weak experience in machine tool development. I request two secondments from Hong Gong’s group. A technician is here to help!"
What he said is very reasonable!
The rectangular tube automatic drilling and blanking production line is actually a large-scale CNC machine tool.The head of this machine tool is equipped with an electric hoist to assist in loading, and hoist the 12-meter-long rectangular tube onto the transport roller table.The rectangular tube can be drilled into the cutting machine tool at high speed through the roller transportation of the transportation roller table.
Before entering the worktable of the cutting machine tool, the angle of the rectangular tube needs to be adjusted through a centering device.This centering device is actually a kind of robot.The scientific name is the hug robot.
Through the calibration of the clamping robot, the rectangular tube can be drilled into the fixture of the cutting machine tool and cut by the flying saw.Then use a drill or punch to drill the rectangular tube.
In short, this production line involves many types of machine tools, which is a combined large-scale CNC machine tool.At present, no domestic company can produce such equipment.Auto companies that use this machine tool all use imported goods.
From this point of view, if Yiming can develop such a large-scale CNC machine tool, the market prospects must be very good!
However, Zheng Cheng's technical team is relatively weak. If you don't increase the number of people, it will be difficult to develop this product.
Thinking of this, Xu Zhenming smiled and nodded: "There are two ways to increase the number of technicians engaged in machine tool research. One way is to promote from within the company, and the other way is to hire retired engineers from Nan'an Machine Tool Plant! Minister Zheng, you How does it look?"
While questioning, he smiled and glanced around, looking at the technicians present.
He feels that today's meeting is very successful and will have a great impact on Yiming's future!
