(For the rudder master book friend 150102201137724)
While Leader Sun was reporting on work, Xu Zhenming was receiving Sister Han in his office.
Sister Han held a summary of employee opinions and reported the situation while looking at the information:
"Mr. Xu! The most important opinions of the employees are: the family's financial conditions are not good, and the three payments can not make up the fund-raising housing funds. In this case, we have agreed to provide them with a support policy and deduct the housing payment from their wages. But if this continues, Bin Bin The start-up capital of the Lake Community is a bit difficult!"
Regarding policy support, Xu Zhenming had made a conclusion before: employees can be given preferential treatment, but they must pay interest on the funds, and the interest rate is similar to bank loans.Because Yiming's funds are also bank loans, the employees must bear the financial expenses themselves.
"What's the problem?" Xu Zhenming drew a tick on this clause and asked Sister Han while reading the same information.His time is relatively tight now. When his subordinates report on work, they usually report the content of the materials themselves.
"There are still some dual employees, can I enjoy two houses?"
"This is definitely not going to work! Are they going to make a fortune on Yiming Company?"
"What about the employees whose father and son are in our company?"
"This can give them two houses!"
...
"The last one, when do the employees care about getting the real estate certificate?"
Hearing these words, Xu Zhenming raised his eyes and looked at Sister Han: "According to my prediction, it will generally take three years to get the real estate certificate!"
The land in Binhu District is collectively owned, and the land certificate needs to be split for a long period.Yiming Company can apply for real estate certificates for employees only after completing these procedures.
After explaining these contents, Xu Zhenming remembered what Lan Dejiang had said, so he said again: "Mr. Han! You will send the application report to the relevant department again next Monday. This time there should be no problem!"
"Oh? Mr. Xu, did you find someone?" Sister Han was surprised.
Seeing her astonished, Xu Zhenming shook his head: "It is Landejiang who is ready to help! He is quite enthusiastic!"
"Landjiang is a nice guy! Are we giving him a house?"
"No need! I have a good reputation now. Who would dare to accept the gifts I gave in the past by the leaders of Nan'an City? Haha...That's fine, I'll save some money! Anyway, I'm famous for being stingy!"
Xu Zhenming laughed self-deprecatingly.
He made several attempts to get several corrupt leaders, and the people of Nan'an City have already rumored his "heroic deeds."Of course, this is only fuelled by people with ulterior motives.
Xu Zhenming didn't bother to care about those things: if people don't offend me, I don't offend people. If people offend me, I only need to win the half-court and they will go in.
Thinking of this, he suddenly remembered something. While signing his name on the documents sent by Sister Han, he instructed: “Mr. Han! Raise Rui Xinsong’s salary level by one level, and appoint under the name of the company. He is the director of a CNC machine tool factory!"
Rui Xinsong is the backbone of the original technical department of Nan'an Machine Tool Plant, with an intermediate title and outstanding technical ability.He is not very young, in his thirties. I heard Hong Aiguo say that this person is learning the technology of mechatronics by himself, and he is a relatively motivated young man.
Therefore, Xu Zhenming obeyed Hong Aiguo's opinion and promoted this person to the position of head of CNC machine tool factory.On the one hand, it can reduce Hong Aiguo’s burden, and on the other hand, it can cultivate talents to succeed the company.
"Oh! How does Xiao Guohong arrange?" Sister Han asked Xu Zhenming in surprise after hearing Xu Zhenming's introduction.
"Xiao Guohong's position as the director of a computer engraving machine factory must follow!"
Xu Zhenming did not look up, and was talking while writing.
Not long after he gave instructions for the report materials sent by Sister Han, he put the pen in his pocket.Later, he picked up the helmet and Sister Han went downstairs together, preparing to participate in the technical discussion meeting of the servo motor R&D project.
This west office building has now been adjusted to Yiming's R&D building, where the technical department and Xu Zhenming are mainly working here.The offices of other departments have been moved to the East Office Building.
When he came to the large conference room on the first floor, he said hello to the technicians present: "Go! Let's check the purchased test equipment first, and then come back to discuss technical issues!"
After hearing the order, everyone put on their safety helmets and followed Xu Zhenming towards the servo motor R&D center.Not long after, everyone came to a specially separated room.
Stored in this room are all kinds of testing and inspection instruments that were just bought back.Some of these instruments are used to inspect permanent magnets, and some are used to inspect enameled wires. They are relatively bulky and earthy in appearance.
For example, the size of the oscilloscope is larger than a large 30-inch color TV, and it is also an analog signal, and the display is monochrome and green.
If you want to do well, you must first sharpen your tools!
"Everyone! With these most advanced domestic instruments, can we make permanent magnet and enameled wire projects?" Seeing this, Xu Zhenming frowned and asked everyone.
Everyone shook their heads.
"Mr. Xu! Regarding the instruments of magnetic field, magnetization, coercivity, magnetization efficiency...and so on, we can modify the inspection instrument of the servo motor and continue to use it to inspect the permanent magnet!"
"However, the detection of the material composition of permanent magnets is a little troublesome! It needs to be determined by physical and chemical tests to be accurate!"
"Then we will build a physical and chemical laboratory! As long as we are willing to invest, what else can't be done?"
After listening to Xu Zhenming's questions, Gao Jianjun, Duan Meisheng, Zheng Cheng, Sun Chao, Qin Jinshui...and others all expressed their opinions.
In other words, if Yiming wants to truly master the entire set of technologies for testing the performance of permanent magnets, it has to increase investment and establish a physical and chemical laboratory.
The investment in other aspects is much less, after all, many kinds of inspection equipment that Yiming has developed can be used in common use.
Moreover, the equipment of Yiming Company is stolen from the equipment of HP Company, and the technology is very advanced.All equipments are digital and computerized to facilitate data collection, storage and analysis.
After thinking of this, Xu Zhenming nodded solemnly:
"Older Gao is right! We don't spend money on shooting, and we are not afraid to spend time. Our company must master the core technology of permanent magnets and enameled wire coils. We can authorize other companies to produce, but we must master the core technology. technology."
This is very important. Xu Zhenming made an unambiguous decision on how to improve the performance of the servo motor.
At present, the servo motors produced by Yiming Company can be applied to ordinary CNC machine tools.The precision four-axis linkage machine tool adopts imported servo motors.He did not dare to take the risk of using the servo motors produced in his own factory, fearing that it would affect the performance of CNC machine tools.
After understanding the domestic test and inspection equipment, Xu Zhenming also had some preliminary judgments in his mind.He waved to everyone: "Let's go! Let's go back to the meeting to discuss the details!"
Before long, everyone moved to the conference room on the first floor of the R&D building.
"Everyone said, how should we tackle the two projects of permanent magnet and enameled wire?" After everyone was seated, Xu Zhenming first spoke and asked questions.
Since the development of Yiming Company today, he no longer needs to fight on his own.Wang Zhizhong and Duan Meisheng are experts in automation control, and Sun Chao is also good at it.
As for the research and development of machinery, machine tools and motors, there are more talents.There are Gao Jianjun, Sun Chao, Zheng Cheng, Qin Jinshui, Meng Haisheng, Hong Aiguo, and Rui Xinsong who has just been promoted.
Therefore, now Xu Zhenming almost doesn't need to draw drawings, only need to review drawings; almost no need to write code or engage in circuit design, only need to review circuit diagrams and software codes.
He mastered the general direction, and put forward the conception diagram, technical parameters, and process parameters of the new product. Below, the project team broke down tasks, formulated R&D procedures and assigned R&D tasks.
"Regarding the research and development of permanent magnets, I think we should first develop our own inspection equipment as Mr. Xu said. Then use the equipment to inspect the permanent magnets we have collected so far, and find out the simplest permanent magnet to make. R&D direction!"
Gao Jianjun has some experience with this product and is the first to express his opinion.
"I agree with Gao Lao's opinion that we should win the easiest mountain to overcome when we are initially attacking the tough spots!"
"I think the simplest permanent magnet should be a natural magnet. This product can be overcome as long as the concentration is controlled. The disadvantage is that the cost is high, and the finished rare earth products are too high!"
"Sun Gong! Don't underestimate the concentration purification process. That thing is also a technical job!"
"Dear colleagues, I think the old American permanent magnets are definitely the easiest to imitate. Japan's material shortage will definitely use sintered ferrite permanent magnets, which are difficult to imitate; the Germans have good craftsmanship and high purity materials, and we are even more uncertain. !"
"..."
After some discussion, the engineers present here basically determined the direction of the imitation of permanent magnets based on their experience.Of course, this has to wait for the final inspection results to determine.Anyway, everyone agrees that they have chosen the direction of high cost and easy copying to overcome this difficulty.
This is also in line with Xu Zhenming's preliminary assumption.He believes that making products is not vindictive. First, master the easy-to-conquer technology. It doesn't matter if the cost is a little higher, it is always much lower than pure imports!
Thinking of this, he smiled and nodded: "For the permanent magnet project, we will follow the procedures discussed by everyone to tackle the key problems, and the specific work plan will be made by Team Leader Zheng!"
"Okay, Mr. Xu! I will come up with a detailed permanent magnet research and development plan tomorrow morning. However, I have to make a suggestion. We can now use ordinary instruments to determine the permanent magnet samples currently collected by the company. , Is it made of natural materials?"
Zheng Cheng recorded the tasks Xu Zhenming confessed, while speaking, putting forward his own new ideas.
He said that this question is more professional, and it needs Gao Jianjun to answer it.
(For the rudder master book friend 150102201137724)
While Leader Sun was reporting on work, Xu Zhenming was receiving Sister Han in his office.
Sister Han held a summary of employee opinions and reported the situation while looking at the information:
"Mr. Xu! The most important opinions of the employees are: the family's financial conditions are not good, and the three payments can not make up the fund-raising housing funds. In this case, we have agreed to provide them with a support policy and deduct the housing payment from their wages. But if this continues, Bin Bin The start-up capital of the Lake Community is a bit difficult!"
Regarding policy support, Xu Zhenming had made a conclusion before: employees can be given preferential treatment, but they must pay interest on the funds, and the interest rate is similar to bank loans.Because Yiming's funds are also bank loans, the employees must bear the financial expenses themselves.
"What's the problem?" Xu Zhenming drew a tick on this clause and asked Sister Han while reading the same information.His time is relatively tight now. When his subordinates report on work, they usually report the content of the materials themselves.
"There are still some dual employees, can I enjoy two houses?"
"This is definitely not going to work! Are they going to make a fortune on Yiming Company?"
"What about the employees whose father and son are in our company?"
"This can give them two houses!"
...
"The last one, when do the employees care about getting the real estate certificate?"
Hearing these words, Xu Zhenming raised his eyes and looked at Sister Han: "According to my prediction, it will generally take three years to get the real estate certificate!"
The land in Binhu District is collectively owned, and the land certificate needs to be split for a long period.Yiming Company can apply for real estate certificates for employees only after completing these procedures.
After explaining these contents, Xu Zhenming remembered what Lan Dejiang had said, so he said again: "Mr. Han! You will send the application report to the relevant department again next Monday. This time there should be no problem!"
"Oh? Mr. Xu, did you find someone?" Sister Han was surprised.
Seeing her astonished, Xu Zhenming shook his head: "It is Landejiang who is ready to help! He is quite enthusiastic!"
"Landjiang is a nice guy! Are we giving him a house?"
"No need! I have a good reputation now. Who would dare to accept the gifts I gave in the past by the leaders of Nan'an City? Haha...That's fine, I'll save some money! Anyway, I'm famous for being stingy!"
Xu Zhenming laughed self-deprecatingly.
He made several attempts to get several corrupt leaders, and the people of Nan'an City have already rumored his "heroic deeds."Of course, this is only fuelled by people with ulterior motives.
Xu Zhenming didn't bother to care about those things: if people don't offend me, I don't offend people. If people offend me, I only need to win the half-court and they will go in.
Thinking of this, he suddenly remembered something. While signing his name on the documents sent by Sister Han, he instructed: “Mr. Han! Raise Rui Xinsong’s salary level by one level, and appoint under the name of the company. He is the director of a CNC machine tool factory!"
Rui Xinsong is the backbone of the original technical department of Nan'an Machine Tool Plant, with an intermediate title and outstanding technical ability.He is not very young, in his thirties. I heard Hong Aiguo say that this person is learning the technology of mechatronics by himself, and he is a relatively motivated young man.
Therefore, Xu Zhenming obeyed Hong Aiguo's opinion and promoted this person to the position of head of CNC machine tool factory.On the one hand, it can reduce Hong Aiguo’s burden, and on the other hand, it can cultivate talents to succeed the company.
"Oh! How does Xiao Guohong arrange?" Sister Han asked Xu Zhenming in surprise after hearing Xu Zhenming's introduction.
"Xiao Guohong's position as the director of a computer engraving machine factory must follow!"
Xu Zhenming did not look up, and was talking while writing.
Not long after he gave instructions for the report materials sent by Sister Han, he put the pen in his pocket.Later, he picked up the helmet and Sister Han went downstairs together, preparing to participate in the technical discussion meeting of the servo motor R&D project.
This west office building has now been adjusted to Yiming's R&D building, where the technical department and Xu Zhenming are mainly working here.The offices of other departments have been moved to the East Office Building.
When he came to the large conference room on the first floor, he said hello to the technicians present: "Go! Let's check the purchased test equipment first, and then come back to discuss technical issues!"
After hearing the order, everyone put on their safety helmets and followed Xu Zhenming towards the servo motor R&D center.Not long after, everyone came to a specially separated room.
Stored in this room are all kinds of testing and inspection instruments that were just bought back.Some of these instruments are used to inspect permanent magnets, and some are used to inspect enameled wires. They are relatively bulky and earthy in appearance.
For example, the size of the oscilloscope is larger than a large 30-inch color TV, and it is also an analog signal, and the display is monochrome and green.
If you want to do well, you must first sharpen your tools!
"Everyone! With these most advanced domestic instruments, can we make permanent magnet and enameled wire projects?" Seeing this, Xu Zhenming frowned and asked everyone.
Everyone shook their heads.
"Mr. Xu! Regarding the instruments of magnetic field, magnetization, coercivity, magnetization efficiency...and so on, we can modify the inspection instrument of the servo motor and continue to use it to inspect the permanent magnet!"
"However, the detection of the material composition of permanent magnets is a little troublesome! It needs to be determined by physical and chemical tests to be accurate!"
"Then we will build a physical and chemical laboratory! As long as we are willing to invest, what else can't be done?"
After listening to Xu Zhenming's questions, Gao Jianjun, Duan Meisheng, Zheng Cheng, Sun Chao, Qin Jinshui...and others all expressed their opinions.
In other words, if Yiming wants to truly master the entire set of technologies for testing the performance of permanent magnets, it has to increase investment and establish a physical and chemical laboratory.
The investment in other aspects is much less, after all, many kinds of inspection equipment that Yiming has developed can be used in common use.
Moreover, the equipment of Yiming Company is stolen from the equipment of HP Company, and the technology is very advanced.All equipments are digital and computerized to facilitate data collection, storage and analysis.
After thinking of this, Xu Zhenming nodded solemnly:
"Older Gao is right! We don't spend money on shooting, and we are not afraid to spend time. Our company must master the core technology of permanent magnets and enameled wire coils. We can authorize other companies to produce, but we must master the core technology. technology."
This is very important. Xu Zhenming made an unambiguous decision on how to improve the performance of the servo motor.
At present, the servo motors produced by Yiming Company can be applied to ordinary CNC machine tools.The precision four-axis linkage machine tool adopts imported servo motors.He did not dare to take the risk of using the servo motors produced in his own factory, fearing that it would affect the performance of CNC machine tools.
After understanding the domestic test and inspection equipment, Xu Zhenming also had some preliminary judgments in his mind.He waved to everyone: "Let's go! Let's go back to the meeting to discuss the details!"
Before long, everyone moved to the conference room on the first floor of the R&D building.
"Everyone said, how should we tackle the two projects of permanent magnet and enameled wire?" After everyone was seated, Xu Zhenming first spoke and asked questions.
Since the development of Yiming Company today, he no longer needs to fight on his own.Wang Zhizhong and Duan Meisheng are experts in automation control, and Sun Chao is also good at it.
As for the research and development of machinery, machine tools and motors, there are more talents.There are Gao Jianjun, Sun Chao, Zheng Cheng, Qin Jinshui, Meng Haisheng, Hong Aiguo, and Rui Xinsong who has just been promoted.
Therefore, now Xu Zhenming almost doesn't need to draw drawings, only need to review drawings; almost no need to write code or engage in circuit design, only need to review circuit diagrams and software codes.
He mastered the general direction, and put forward the conception diagram, technical parameters, and process parameters of the new product. Below, the project team broke down tasks, formulated R&D procedures and assigned R&D tasks.
"Regarding the research and development of permanent magnets, I think we should first develop our own inspection equipment as Mr. Xu said. Then use the equipment to inspect the permanent magnets we have collected so far, and find out the simplest permanent magnet to make. R&D direction!"
Gao Jianjun has some experience with this product and is the first to express his opinion.
"I agree with Gao Lao's opinion that we should win the easiest mountain to overcome when we are initially attacking the tough spots!"
"I think the simplest permanent magnet should be a natural magnet. This product can be overcome as long as the concentration is controlled. The disadvantage is that the cost is high, and the finished rare earth products are too high!"
"Sun Gong! Don't underestimate the concentration purification process. That thing is also a technical job!"
"Dear colleagues, I think the old American permanent magnets are definitely the easiest to imitate. Japan's material shortage will definitely use sintered ferrite permanent magnets, which are difficult to imitate; the Germans have good craftsmanship and high purity materials, and we are even more uncertain. !"
"..."
After some discussion, the engineers present here basically determined the direction of the imitation of permanent magnets based on their experience.Of course, this has to wait for the final inspection results to determine.Anyway, everyone agrees that they have chosen the direction of high cost and easy copying to overcome this difficulty.
This is also in line with Xu Zhenming's preliminary assumption.He believes that making products is not vindictive. First, master the easy-to-conquer technology. It doesn't matter if the cost is a little higher, it is always much lower than pure imports!
Thinking of this, he smiled and nodded: "For the permanent magnet project, we will follow the procedures discussed by everyone to tackle the key problems, and the specific work plan will be made by Team Leader Zheng!"
"Okay, Mr. Xu! I will come up with a detailed permanent magnet research and development plan tomorrow morning. However, I have to make a suggestion. We can now use ordinary instruments to determine the permanent magnet samples currently collected by the company. , Is it made of natural materials?"
Zheng Cheng recorded the tasks Xu Zhenming confessed, while speaking, putting forward his own new ideas.
He said that this question is more professional, and it needs Gao Jianjun to answer it.
