Seeing Chen Dengliang's initiative to admit his mistake, Xu Zhenming's mood improved a lot.Employees like this can still be trained, otherwise they will be expelled directly.
"Director Chen! Although our company has not implemented the standards, it has always been operating in accordance with the ISO9000 quality management system. I hope you can pay attention to the problems with these workpieces! My opinion is: 1. All these workpieces are scrapped; 2. , All these parts are sent to the physical and chemical laboratory for welding procedure qualification before they are scrapped!"
Xu Zhenming has strict requirements on product quality. Chen Dengliang has not taken care of his face because Chen Dengliang has taken the initiative to admit his mistakes, so he does what he needs to do.
"Mr. Xu! Since these artifacts are scrapped, why should we spend our energy to inspect again?" Xiao Gong asked a little surprised when he could not understand Xu Zhenming's intention.
It is his responsibility to submit the workpiece for inspection, and he still has to ask clearly.
After taking a look at him, Xu Zhenming then looked at Chen Dengliang, "By doing this, we can test the riveting welder who welds the workpiece. What is the level of technology!"
He asked Mr. Xiao to do film inspection, impact test, metallographic analysis... and so on for the weld.Only in this way can the technical level of the first-line riveting welder be tested.
Then, he turned his face to ask Chen Dengliang: "So the riveting welder will do the internal assessment again, and only those who meet the required technical level can be employed. The riveting welder with a low product qualification rate must adopt a new assessment mechanism and do not give up quality because of output! "
"Yes!" Chen Dengliang and Xiao Gong left together.
Seeing them leaving, Xu Zhenming turned around and asked Duny: "Doni! We scrapped the parts with defective surface quality. Are you satisfied?"
"Haha... Mr. Xu! We support your point of view!" Duny, Anthony and others gave thumbs up.The two of them were a little frightened by Xu Zhenming, but they didn't say their requirements to improve the room and board.
Of course, it was useless for them to say it, and Xu Zhenming would ignore it.
Since I have offended you, why bother to kneel and lick?
Xu Zhenming handled this small problem that didn't need him to deal with, and immediately followed Huang Kai to the blanking workshop.
At this time, the technicians of Huang Kai's team have already prepared the CNC plasma cutting machine.Seeing Xu Zhenming coming, they were going to turn on the power to do an experiment.
At this time, Xu Zhenming smiled and shook his head: "Let's test the manual plasma cutting machine first, and find a 10mm stainless steel plate and a 20mm stainless steel plate to do the experiment."
"This..." The technicians of Huang Kai's team were suddenly dumbfounded.They have never done this kind of experiment, and have been cutting ordinary steel plates with CNC plasma experiments.
Fortunately, Huang Kai has done many tests during the commissioning of the plasma cutting machine, and he is confident.He shouted to his powerful men: "Lao Li! Hurry up and follow Mr. Xu's instructions!"
Old Li immediately reacted upon hearing this, and with the help of his colleagues, he found a 20mm thick stainless steel dry plate for experimentation.
Stainless steel has a high viscosity, and if it is cut with flame, the cut will be very ugly.When cutting with a plasma cutting machine, the molten steel is just blown away by the air containing the plasma beam, and the cut is beautiful.
"Mr. Xu! Everything is ready!" After a while, Lao Li made preparations, ready to start the equipment and start working.
Xu Zhenming glanced at him, nodded and said: "First pierce, cut the small circle, and then cut the big circle!"
Whether it is a plasma cutting machine or a flame cutting machine, perforating and cutting small circles, it best reflects the performance and quality of this equipment.
"Damn! We, Mr. Xu, turned out to be experts!" Seeing Xu Zhenming's instructions, Lao Li and others were shocked.They didn't expect that their big boss was very proficient in the performance testing methods of plasma cutting machines.
At this time, Xu Zhenming said to Huang Kai: "Connect the output power test instrument and other instruments to this plasma cutting machine. We want to test the stability of its output current, the stability of the plasma beam, etc.!"
By this time, these technicians who had merged from Nan'an Electrical Machinery Factory had put away their contempt.They all know that the big boss is an insider and can't be sloppy.
After the preparations were done, someone turned on the air compressor.
The air compressor made a roar of "Boom, Boom, Boom", Lao Li turned on the switch with a snap, holding the cutting gun of the plasma cutting machine, and began to perforate and cut small circles of 12 mm and 20 mm.
After these actions are operated, the cut of the workpiece is very beautiful.
But Xu Zhenming asked Huang Kai to observe the output current and output power data.
These data are the key.If it is unstable, this type of plasma cutting machine still has not been successfully developed.Still need to find the reasons, continue to manufacture test prototypes.
"Report to Mr. Xu! The output current detection result is very stable!"
"Report to Mr. Xu, the output power is very stable!"
"The workpiece cutting effect is good, and the cutting speed meets the design requirements!"
Before long, the technicians in charge of monitoring the data all came to report and handed over the report data of the recorded data.
Seeing this situation, Xu Zhenming smiled and nodded: "Well... the model of this plasma cutting machine can be determined. The low power is the 1200 type, and the high power is the 2000 type."
After speaking, he was going to leave the blanking workshop and no longer watch the cutting effect of the CNC plasma cutting machine.
Seeing this, Huang Kai asked Xu Zhenming in surprise: "Mr. Xu! Don't you need to look at the cutting effect of the CNC plasma cutting machine?"
"No need! The key to the CNC plasma cutting machine is the plasma cutting head. Only when we improve the quality of the plasma cutting machine, can the quality and performance of the CNC plasma cutting machine be guaranteed!"
Xu Zhenming knew this equipment very well and explained with a smile.
Before his rebirth, there were many domestic manufacturers of CNC flame plasma cutting machines. Many manufacturers did not manufacture plasma cutting machines, but purchased this kind of products.Yiming Group is different from those manufacturers. It belongs to the pioneer and must manufacture its own plasma cutting machine.
Seeing these people from Huang Kai's team looked at him eagerly, Xu Zhenming remembered to forget to say a word."Your project bonus this month will be cashed in your salary!" He announced with a smile.
"Oh...Thank Mr. Xu!"
"Papa..."
"Is our product finalized?"
"It's finalized! It must be finalized! Mr. Xu has agreed to give us bonuses! Haha..."
Everyone applauded happily.
Huang Kai was still worried, and walked out of the factory door with Xu Zhenming."Mr. Xu! What about the technical parameter setting of the plasma numerical control part? Which technical team is responsible?" He asked Xu Zhenming cautiously.
Xu Zhenming glanced at him and said: "You just need to hand over this project to Wang Zhizhong and Wang Qiang! Your next job is to apply for invention patents, develop portable CNC plasma cutting machines, develop heavy CNC plasma cutting machines, and develop ultra-high power CNC plasmas. Cutting machine and so on."
Then, Xu Zhenming also told Huang Kai: Yiming Group Company is ready to pay him and Wang Zhizhong a patent royalties immediately.
"Thank Mr. Xu! Thank you..."
Huang Kai heard this, a little incoherent.
Seeing his appearance, Xu Zhenming smiled and waved goodbye to leave.
Back in the compound of the group company, he happened to meet Gao Jianjun head-on.Gao Jianjun and Hong Aiguo are the two leaders of the Italian Danili company project.When there is a quality problem, Xu Zhenming will definitely inform him, "Minister Gao! Please stay!"
"Mr. Xu! What are you looking for? I'm about to go to a large riveting and welding parts manufacturing base to take a look!"
Gao Jianjia asked surprisingly.He has been very busy during this period of time, looking at riveted and welded parts, looking at raw materials, looking at machined parts, looking at purchased parts, and so on.
Taking a look at him, Xu Zhenming smiled and said, "Minister Gao, let's go to my office together. I have something to discuss with you."
Five minutes later, the two moved to Xu Zhenming's office.
Xu Zhenming made a cup of tea for Gao Jianjun.Both of them took a sip of tea before he slowly said: "A batch of riveting and welding parts was scrapped in the large-scale riveting and welding parts manufacturing base. The group company's economic loss is relatively large, and visual estimation is estimated to be no less than 100,000 yuan."
"Oh! Is there such a thing?" Gao Jianjun blushed after hearing the news.
He is the person in charge of the project and has to coordinate and manage the entire project.From the procurement of raw materials, riveting and welding, machining, heat treatment, assembly, final assembly and commissioning, packaging and delivery, etc., these are the responsibility of the project manager team.
Otherwise, is the project bonus so easy to get?
So when he heard the news, Gao Jianjun smiled awkwardly, "Mr. Xu! I am responsible for this matter. I will take the initiative to deduct points during project evaluation."
What he meant, I took the initiative to deduct the bonus.
But this is not Xu Zhenming's main purpose for looking for him.If it is to deduct such a small bonus from Gao Jianjun, why should Xu Zhenming call him?Just sign and approve the fine.
Seeing the red face of the old man, Xu Zhenming slowed down and said, "Minister Gao, I call you to discuss how to thoroughly understand the drawings of the medium plate production line, not fines. Of course, fines must be fined! No one can violate factory rules and regulations."
"Through the Italian drawings?" Gao Jianjun looked at Xu Zhenming in surprise.
Xu Zhenming nodded: "My idea is that your team members, together with Shi Fan and other college students, will all go to the production line and the procurement line to act as production supervisors and quality inspectors. Let them really understand the foreigners' drawings. , But isn’t it faster to improve the design?"
This method of training technicians has been adopted by large state-owned enterprises such as Nan'an Iron and Steel Group Corporation.Private companies like Yiming Group have no time to train their employees, so everyone has never put forward this idea.
Seeing his boss's proposal, Gao Jianjun certainly raised his hands in agreement: "Mr. Xu! Your method is better! As soon as the Italian goods are delivered. I can guarantee that the several commissioned design tasks of Nan'an Iron and Steel Group Corporation have been completed. Hahaha..."
Old man Gao laughed excitedly.
He has feelings for Nan'an Iron and Steel Group Corporation and hopes to complete the several localization projects he brought with him as quickly as possible.
Seeing Chen Dengliang's initiative to admit his mistake, Xu Zhenming's mood improved a lot.Employees like this can still be trained, otherwise they will be expelled directly.
"Director Chen! Although our company has not implemented the standards, it has always been operating in accordance with the ISO9000 quality management system. I hope you can pay attention to the problems with these workpieces! My opinion is: 1. All these workpieces are scrapped; 2. , All these parts are sent to the physical and chemical laboratory for welding procedure qualification before they are scrapped!"
Xu Zhenming has strict requirements on product quality. Chen Dengliang has not taken care of his face because Chen Dengliang has taken the initiative to admit his mistakes, so he does what he needs to do.
"Mr. Xu! Since these artifacts are scrapped, why should we spend our energy to inspect again?" Xiao Gong asked a little surprised when he could not understand Xu Zhenming's intention.
It is his responsibility to submit the workpiece for inspection, and he still has to ask clearly.
After taking a look at him, Xu Zhenming then looked at Chen Dengliang, "By doing this, we can test the riveting welder who welds the workpiece. What is the level of technology!"
He asked Mr. Xiao to do film inspection, impact test, metallographic analysis... and so on for the weld.Only in this way can the technical level of the first-line riveting welder be tested.
Then, he turned his face to ask Chen Dengliang: "So the riveting welder will do the internal assessment again, and only those who meet the required technical level can be employed. The riveting welder with a low product qualification rate must adopt a new assessment mechanism and do not give up quality because of output! "
"Yes!" Chen Dengliang and Xiao Gong left together.
Seeing them leaving, Xu Zhenming turned around and asked Duny: "Doni! We scrapped the parts with defective surface quality. Are you satisfied?"
"Haha... Mr. Xu! We support your point of view!" Duny, Anthony and others gave thumbs up.The two of them were a little frightened by Xu Zhenming, but they didn't say their requirements to improve the room and board.
Of course, it was useless for them to say it, and Xu Zhenming would ignore it.
Since I have offended you, why bother to kneel and lick?
Xu Zhenming handled this small problem that didn't need him to deal with, and immediately followed Huang Kai to the blanking workshop.
At this time, the technicians of Huang Kai's team have already prepared the CNC plasma cutting machine.Seeing Xu Zhenming coming, they were going to turn on the power to do an experiment.
At this time, Xu Zhenming smiled and shook his head: "Let's test the manual plasma cutting machine first, and find a 10mm stainless steel plate and a 20mm stainless steel plate to do the experiment."
"This..." The technicians of Huang Kai's team were suddenly dumbfounded.They have never done this kind of experiment, and have been cutting ordinary steel plates with CNC plasma experiments.
Fortunately, Huang Kai has done many tests during the commissioning of the plasma cutting machine, and he is confident.He shouted to his powerful men: "Lao Li! Hurry up and follow Mr. Xu's instructions!"
Old Li immediately reacted upon hearing this, and with the help of his colleagues, he found a 20mm thick stainless steel dry plate for experimentation.
Stainless steel has a high viscosity, and if it is cut with flame, the cut will be very ugly.When cutting with a plasma cutting machine, the molten steel is just blown away by the air containing the plasma beam, and the cut is beautiful.
"Mr. Xu! Everything is ready!" After a while, Lao Li made preparations, ready to start the equipment and start working.
Xu Zhenming glanced at him, nodded and said: "First pierce, cut the small circle, and then cut the big circle!"
Whether it is a plasma cutting machine or a flame cutting machine, perforating and cutting small circles, it best reflects the performance and quality of this equipment.
"Damn! We, Mr. Xu, turned out to be experts!" Seeing Xu Zhenming's instructions, Lao Li and others were shocked.They didn't expect that their big boss was very proficient in the performance testing methods of plasma cutting machines.
At this time, Xu Zhenming said to Huang Kai: "Connect the output power test instrument and other instruments to this plasma cutting machine. We want to test the stability of its output current, the stability of the plasma beam, etc.!"
By this time, these technicians who had merged from Nan'an Electrical Machinery Factory had put away their contempt.They all know that the big boss is an insider and can't be sloppy.
After the preparations were done, someone turned on the air compressor.
The air compressor made a roar of "Boom, Boom, Boom", Lao Li turned on the switch with a snap, holding the cutting gun of the plasma cutting machine, and began to perforate and cut small circles of 12 mm and 20 mm.
After these actions are operated, the cut of the workpiece is very beautiful.
But Xu Zhenming asked Huang Kai to observe the output current and output power data.
These data are the key.If it is unstable, this type of plasma cutting machine still has not been successfully developed.Still need to find the reasons, continue to manufacture test prototypes.
"Report to Mr. Xu! The output current detection result is very stable!"
"Report to Mr. Xu, the output power is very stable!"
"The workpiece cutting effect is good, and the cutting speed meets the design requirements!"
Before long, the technicians in charge of monitoring the data all came to report and handed over the report data of the recorded data.
Seeing this situation, Xu Zhenming smiled and nodded: "Well... the model of this plasma cutting machine can be determined. The low power is the 1200 type, and the high power is the 2000 type."
After speaking, he was going to leave the blanking workshop and no longer watch the cutting effect of the CNC plasma cutting machine.
Seeing this, Huang Kai asked Xu Zhenming in surprise: "Mr. Xu! Don't you need to look at the cutting effect of the CNC plasma cutting machine?"
"No need! The key to the CNC plasma cutting machine is the plasma cutting head. Only when we improve the quality of the plasma cutting machine, can the quality and performance of the CNC plasma cutting machine be guaranteed!"
Xu Zhenming knew this equipment very well and explained with a smile.
Before his rebirth, there were many domestic manufacturers of CNC flame plasma cutting machines. Many manufacturers did not manufacture plasma cutting machines, but purchased this kind of products.Yiming Group is different from those manufacturers. It belongs to the pioneer and must manufacture its own plasma cutting machine.
Seeing these people from Huang Kai's team looked at him eagerly, Xu Zhenming remembered to forget to say a word."Your project bonus this month will be cashed in your salary!" He announced with a smile.
"Oh...Thank Mr. Xu!"
"Papa..."
"Is our product finalized?"
"It's finalized! It must be finalized! Mr. Xu has agreed to give us bonuses! Haha..."
Everyone applauded happily.
Huang Kai was still worried, and walked out of the factory door with Xu Zhenming."Mr. Xu! What about the technical parameter setting of the plasma numerical control part? Which technical team is responsible?" He asked Xu Zhenming cautiously.
Xu Zhenming glanced at him and said: "You just need to hand over this project to Wang Zhizhong and Wang Qiang! Your next job is to apply for invention patents, develop portable CNC plasma cutting machines, develop heavy CNC plasma cutting machines, and develop ultra-high power CNC plasmas. Cutting machine and so on."
Then, Xu Zhenming also told Huang Kai: Yiming Group Company is ready to pay him and Wang Zhizhong a patent royalties immediately.
"Thank Mr. Xu! Thank you..."
Huang Kai heard this, a little incoherent.
Seeing his appearance, Xu Zhenming smiled and waved goodbye to leave.
Back in the compound of the group company, he happened to meet Gao Jianjun head-on.Gao Jianjun and Hong Aiguo are the two leaders of the Italian Danili company project.When there is a quality problem, Xu Zhenming will definitely inform him, "Minister Gao! Please stay!"
"Mr. Xu! What are you looking for? I'm about to go to a large riveting and welding parts manufacturing base to take a look!"
Gao Jianjia asked surprisingly.He has been very busy during this period of time, looking at riveted and welded parts, looking at raw materials, looking at machined parts, looking at purchased parts, and so on.
Taking a look at him, Xu Zhenming smiled and said, "Minister Gao, let's go to my office together. I have something to discuss with you."
Five minutes later, the two moved to Xu Zhenming's office.
Xu Zhenming made a cup of tea for Gao Jianjun.Both of them took a sip of tea before he slowly said: "A batch of riveting and welding parts was scrapped in the large-scale riveting and welding parts manufacturing base. The group company's economic loss is relatively large, and visual estimation is estimated to be no less than 100,000 yuan."
"Oh! Is there such a thing?" Gao Jianjun blushed after hearing the news.
He is the person in charge of the project and has to coordinate and manage the entire project.From the procurement of raw materials, riveting and welding, machining, heat treatment, assembly, final assembly and commissioning, packaging and delivery, etc., these are the responsibility of the project manager team.
Otherwise, is the project bonus so easy to get?
So when he heard the news, Gao Jianjun smiled awkwardly, "Mr. Xu! I am responsible for this matter. I will take the initiative to deduct points during project evaluation."
What he meant, I took the initiative to deduct the bonus.
But this is not Xu Zhenming's main purpose for looking for him.If it is to deduct such a small bonus from Gao Jianjun, why should Xu Zhenming call him?Just sign and approve the fine.
Seeing the red face of the old man, Xu Zhenming slowed down and said, "Minister Gao, I call you to discuss how to thoroughly understand the drawings of the medium plate production line, not fines. Of course, fines must be fined! No one can violate factory rules and regulations."
"Through the Italian drawings?" Gao Jianjun looked at Xu Zhenming in surprise.
Xu Zhenming nodded: "My idea is that your team members, together with Shi Fan and other college students, will all go to the production line and the procurement line to act as production supervisors and quality inspectors. Let them really understand the foreigners' drawings. , But isn’t it faster to improve the design?"
This method of training technicians has been adopted by large state-owned enterprises such as Nan'an Iron and Steel Group Corporation.Private companies like Yiming Group have no time to train their employees, so everyone has never put forward this idea.
Seeing his boss's proposal, Gao Jianjun certainly raised his hands in agreement: "Mr. Xu! Your method is better! As soon as the Italian goods are delivered. I can guarantee that the several commissioned design tasks of Nan'an Iron and Steel Group Corporation have been completed. Hahaha..."
Old man Gao laughed excitedly.
He has feelings for Nan'an Iron and Steel Group Corporation and hopes to complete the several localization projects he brought with him as quickly as possible.
