"Yes! Mr. Xu!" Seeing that the attitude of the boss Xu Zhenming was fairly good, Zeng Xiao felt much relieved.Afterwards, he immediately convened technicians to discuss on the spot.
"Director Zeng, the material of the No. 2 alloy copper ingot is relatively hard, and the drawing speed is much slower. We should reduce the overall speed of the production line."
"The temperature of the annealing line is too high, the temperature should be lowered!"
"The temperature of the enameled wire is too slow, which will affect the solidification of the resin."
Based on the product quality problems just now, the technicians stated their ideas one by one.
Soon after, a mature commissioning program was released.
According to this debugging plan, Zeng Xiao asked the technical staff of the team to start separate operations immediately and fine-tune the various equipment of the enameled wire production line.
After half an hour, all equipment was debugged, and the production line started again for trial production.However, this time it was still unsuccessful. The temperature of the annealing furnace was much lower and the annealing effect was not achieved.Fortunately, there are fewer problems this time, just reset the temperature of the annealing furnace.
After repeated debugging in this way, one hour later, the enameled wire production line started again for trial production.
This time, the entire enameled wire was finally produced smoothly.The quality inspectors immediately took various instruments and meters to test the newly released enameled wire.
"Report to Mr. Xu! The quality of this enameled wire is qualified, and the technical parameters meet the technical requirements!"
Soon after, the technicians all came to Xu Zhenming's side to report the inspection results.
"Papa..." Xu Zhenming hadn't spoken yet, and there was applause in the workshop.All the technicians and operators applauded excitedly at this time.
"Mr. Xu! The main spare parts for the second-generation servo motors have now been localized! Hahaha..."
"Tomorrow we will be able to take out the first second-generation servo motor produced nationwide!"
"With regard to such cutting-edge products as servo motors, we are finally able to reach the level of countries such as Ri Mold!"
Qin Jinshui, Zheng Cheng, Lai Wei and others all laughed excitedly at this time.
Seeing this scene, Xu Zhenming naturally wouldn't be disappointed by saying other harsh requirements.
He smiled and said: "First, the group company will give you the remaining bonus. Second, you must summarize the experience and lessons in the test project. The third is very important. You must start R&D immediately. The intelligent production line of the group company!"
"Yes! Mr. Xu!"
"Thank Mr. Xu, we will work hard! Hahaha..."
"I have a treat tonight, everyone is not drunk or home!"
Everyone on the scene cheered excitedly.If you can get the full project research and development award, everyone will naturally have a happy celebration.
Xu Zhenming also walked out of this workshop with a smile.
At this time, the setting sun has set, and the dusk is thick.
A few days later, Qin Jinshui and Zheng Cheng came to Xu Zhenming's office together.Both of them were holding a large cardboard box with excited smiles on their faces.
"I see! You start the equipment first and test the operation effect. I will take a look when I have time!" At this time, Xu Zhenming was making a call.
Just now, Sun Chao called him and said that the prototype machine for automatic drilling and blanking had been remodeled. Xu Zhenming was invited to inspect and give some opinions.Xu Zhenming originally wanted to take a look at the product development workshop, but Qin Jinshui and Zheng Cheng came to report on their work, so they temporarily decided to postpone the time to go to the site.
After hanging up the phone, he came to sit down at the conference table.
At this time, Zheng Cheng and Qin Jinshui took out six brand new servo motors and placed them on the glass conference table.
"Mr. Xu! These six servo motors are different models of the second-generation servo motors we are opening this time. I would like to ask you to determine the models!" At this time, Qin Jinshui pointed to the six servo motors on the glass table and explained. .
The six servo motors are all painted Yiming white, well-made, and elegant in shape, which is much higher than the first-generation servo motors.There are six types of motors with the same technical specification, which is a common imagination in product development.Some products may be selected from hundreds of test models.
Xu Zhenming picked up all six servo motors and took a look, and then asked: "Where is the product performance curve?"
"Mr. Xu! This is the product technical parameter curve diagram of our six servo motors!"
"This is a curve comparison chart of foreign products of the same model!"
After listening to Xu Zhenming's questioning, Qin Jinshui and Zheng Cheng suddenly got into a mess, found a pile of graph data from the big cardboard box and handed it to Xu Zhenming.
Xu Zhenming didn't look at the performance comparison curve of his own products, but picked up the comparison chart between his own products and foreigners' products.After a comparison, among the products of Yiming Group, only two types of servo motors can break the wrist with the old mold products, which are slightly better than the old mold products.
If these products are compared with Nissho's products, there is still a slight gap.Fortunately, the gap is not very large, it is a grade product in a strict sense.
"Why is there a gap between our products and Nissho's servo motors?" After reading the graph, Xu Zhenming put down the information in his hands and looked at Qin Jinshui and Zheng Cheng on the opposite side.
"Xu Zhenming! There is still a gap between our permanent magnet materials and Nissho's!"
"The indicators of alloy copper ingots are also unstable and we can't control it. In addition, the precision of the enameled wires and permanent magnets we tested and produced still has a gap!"
After thinking about it for a while, Qin Jinshui and Zheng Cheng explained their shortcomings.
It is not terrible to have problems, but to find the cause of the problem is really terrible.You have reached the ceiling, and you have used all your potentials, but you are still not as good as the day.What should I do next?
Therefore, Xu Zhenming laughed happily when he heard that the two of them could tell so many differences, "Very good! If you can find the unsatisfactory, I am relieved! Looking back, you immediately make a plan for gradual improvement, let us Improve one by one, and solve your own shortcomings!"
"It's Mr. Xu! But, which model should we choose to determine the model of the second-generation servo motor?"
Qin Jinshui solemnly recorded Xu Zhenming's request, and then let Xu Zhenming make a decision to determine the true model of the servo motor.
Xu Zhenming said without hesitation: "Do you want to talk about it? Of course you have to choose the No. 3 servo motor! The performance of this servo motor is much better than the old one, so choose it!"
"But Mr. Xu! The cost of this motor is also the highest!"
"Mr. Xu! Or we can determine two models at once, one is better and the other is almost!"
Qin Jinshui and Zheng Cheng reported the situation with a wry smile.
After Xu Zhenming heard this suggestion, he shook his head with a serious expression: "No! The second-generation servo motors must be the best. These motors will be used on CNC machine tools in the future, not careless! Moreover, our first-generation servo motors , And gradually weed out!"
"Yes! Mr. Xu!" Seeing Xu Zhenming's determination, Qin Jinshui and Zheng Cheng stopped persuading them.
The two of them immediately stood up, ready to clean up and leave Xu Zhenming's office.
At this time, Xu Zhenming waved his hand and said, "Minister Zheng! You immediately transfer the servo motor research and development work in your hand to Factory Manager Qin, ready to take over the research and development work of the automatic drilling and cutting production line!"
"Ah? Mr. Xu! There is a bottleneck in the research and development of the automatic drilling and cutting production line?" Zheng Cheng asked Xu Zhenming in surprise.
But Xu Zhenming smiled and shook his head: "On the contrary! This project has achieved certain results! However, it is precisely because of the results that we have to speed up the research and development speed and finalize the new product!"
"Okay Mr. Xu! I will listen to your arrangements!" Zheng Cheng nodded with a smile while sorting out the information.
Soon after, he handed over the materials and other materials to Qin Jinshui, and moved with Xu Zhenming to the test workshop for product development.
Workers in the test workshop are busy, lifting a 200*200 rectangular steel pipe and stacking it on the transport roller table of the automatic drilling and blanking production line.
At this time, the automatic drilling and blanking production line has been up and running, the transport roller table is running slowly, the hydraulic automatic punching machine, the CNC automatic drilling machine, the CNC sawing machine and other equipment are all running without load, making bursts of roar.
Sun Chao and members of his technical team, scattered at the node locations of various equipment, are observing the operation of the equipment."Mr. Xu! All the preparatory work has been completed, just waiting for the load test!" Seeing Xu Zhenming leading Zheng Cheng, Sun Chao reported the situation with a smile.
After Zheng Cheng was transferred to develop the servo motor project, his pressure was much greater.On the one hand, I want to engage in the project of automatic drilling and cutting production line, and on the other side, I have to work on the project of computerized cutting of clothing, which feels a bit powerless.
Xu Zhenming also knew his difficulties, so he transferred Zheng Cheng's technical team back to work on this production line."Assistant Sun! Start trial production!" He smiled and gave instructions to Sun Chao.
Hearing this, Sun Chaochao waved his hand to Wang Zhizhong, who was in charge of the general control, "Wang Gong can start!"
With a "pop", Wang Zhizhong hit the enter key.
"Woo..." The transport roller moved at high speed, rolling with a rectangular tube towards the centering device.Then it suddenly slowed down and stopped.The centering device starts to work, and the aligning roller table rolls left and right in both directions with the rectangular tube rolling toward the middle of the transport roller table.Immediately afterwards, the pneumatic actuator started to work, and the left and right arms emerged from the transportation roller table, clamping the rectangular tube package and sending it into the center of the processing station.
After this set of actions, all the conditions of the production line are normal.
The rectangular tube that enters the station is pushed by the transport roller table and quickly comes to the clamping machine position.The double clamping robot holds the rectangular tube tightly and waits for the CNC drilling machine and CNC punching machine to complete the punching operation.
I saw that in the four directions of the rectangular tube, dozens of drill bits protruded at the same time, rotating at high speed to start drilling.At the stations where the drill cannot be processed, the CNC punching machine is also working at the same time, punching holes.
This set of actions is also normal.
After five minutes have passed, the clamping robot sends the rectangular pipe that has been drilled to the processing station of the CNC sawing machine.The CNC sawing machine starts to work and cuts the rectangular tube.
At this point in the process, the main functions of this production line have been reflected.
In other words, the prototype of this automatic drilling and blanking production line has been successfully developed.
However, Xu Zhenming looked all the way, but his brows were still frowning.
"Yes! Mr. Xu!" Seeing that the attitude of the boss Xu Zhenming was fairly good, Zeng Xiao felt much relieved.Afterwards, he immediately convened technicians to discuss on the spot.
"Director Zeng, the material of the No. 2 alloy copper ingot is relatively hard, and the drawing speed is much slower. We should reduce the overall speed of the production line."
"The temperature of the annealing line is too high, the temperature should be lowered!"
"The temperature of the enameled wire is too slow, which will affect the solidification of the resin."
Based on the product quality problems just now, the technicians stated their ideas one by one.
Soon after, a mature commissioning program was released.
According to this debugging plan, Zeng Xiao asked the technical staff of the team to start separate operations immediately and fine-tune the various equipment of the enameled wire production line.
After half an hour, all equipment was debugged, and the production line started again for trial production.However, this time it was still unsuccessful. The temperature of the annealing furnace was much lower and the annealing effect was not achieved.Fortunately, there are fewer problems this time, just reset the temperature of the annealing furnace.
After repeated debugging in this way, one hour later, the enameled wire production line started again for trial production.
This time, the entire enameled wire was finally produced smoothly.The quality inspectors immediately took various instruments and meters to test the newly released enameled wire.
"Report to Mr. Xu! The quality of this enameled wire is qualified, and the technical parameters meet the technical requirements!"
Soon after, the technicians all came to Xu Zhenming's side to report the inspection results.
"Papa..." Xu Zhenming hadn't spoken yet, and there was applause in the workshop.All the technicians and operators applauded excitedly at this time.
"Mr. Xu! The main spare parts for the second-generation servo motors have now been localized! Hahaha..."
"Tomorrow we will be able to take out the first second-generation servo motor produced nationwide!"
"With regard to such cutting-edge products as servo motors, we are finally able to reach the level of countries such as Ri Mold!"
Qin Jinshui, Zheng Cheng, Lai Wei and others all laughed excitedly at this time.
Seeing this scene, Xu Zhenming naturally wouldn't be disappointed by saying other harsh requirements.
He smiled and said: "First, the group company will give you the remaining bonus. Second, you must summarize the experience and lessons in the test project. The third is very important. You must start R&D immediately. The intelligent production line of the group company!"
"Yes! Mr. Xu!"
"Thank Mr. Xu, we will work hard! Hahaha..."
"I have a treat tonight, everyone is not drunk or home!"
Everyone on the scene cheered excitedly.If you can get the full project research and development award, everyone will naturally have a happy celebration.
Xu Zhenming also walked out of this workshop with a smile.
At this time, the setting sun has set, and the dusk is thick.
A few days later, Qin Jinshui and Zheng Cheng came to Xu Zhenming's office together.Both of them were holding a large cardboard box with excited smiles on their faces.
"I see! You start the equipment first and test the operation effect. I will take a look when I have time!" At this time, Xu Zhenming was making a call.
Just now, Sun Chao called him and said that the prototype machine for automatic drilling and blanking had been remodeled. Xu Zhenming was invited to inspect and give some opinions.Xu Zhenming originally wanted to take a look at the product development workshop, but Qin Jinshui and Zheng Cheng came to report on their work, so they temporarily decided to postpone the time to go to the site.
After hanging up the phone, he came to sit down at the conference table.
At this time, Zheng Cheng and Qin Jinshui took out six brand new servo motors and placed them on the glass conference table.
"Mr. Xu! These six servo motors are different models of the second-generation servo motors we are opening this time. I would like to ask you to determine the models!" At this time, Qin Jinshui pointed to the six servo motors on the glass table and explained. .
The six servo motors are all painted Yiming white, well-made, and elegant in shape, which is much higher than the first-generation servo motors.There are six types of motors with the same technical specification, which is a common imagination in product development.Some products may be selected from hundreds of test models.
Xu Zhenming picked up all six servo motors and took a look, and then asked: "Where is the product performance curve?"
"Mr. Xu! This is the product technical parameter curve diagram of our six servo motors!"
"This is a curve comparison chart of foreign products of the same model!"
After listening to Xu Zhenming's questioning, Qin Jinshui and Zheng Cheng suddenly got into a mess, found a pile of graph data from the big cardboard box and handed it to Xu Zhenming.
Xu Zhenming didn't look at the performance comparison curve of his own products, but picked up the comparison chart between his own products and foreigners' products.After a comparison, among the products of Yiming Group, only two types of servo motors can break the wrist with the old mold products, which are slightly better than the old mold products.
If these products are compared with Nissho's products, there is still a slight gap.Fortunately, the gap is not very large, it is a grade product in a strict sense.
"Why is there a gap between our products and Nissho's servo motors?" After reading the graph, Xu Zhenming put down the information in his hands and looked at Qin Jinshui and Zheng Cheng on the opposite side.
"Xu Zhenming! There is still a gap between our permanent magnet materials and Nissho's!"
"The indicators of alloy copper ingots are also unstable and we can't control it. In addition, the precision of the enameled wires and permanent magnets we tested and produced still has a gap!"
After thinking about it for a while, Qin Jinshui and Zheng Cheng explained their shortcomings.
It is not terrible to have problems, but to find the cause of the problem is really terrible.You have reached the ceiling, and you have used all your potentials, but you are still not as good as the day.What should I do next?
Therefore, Xu Zhenming laughed happily when he heard that the two of them could tell so many differences, "Very good! If you can find the unsatisfactory, I am relieved! Looking back, you immediately make a plan for gradual improvement, let us Improve one by one, and solve your own shortcomings!"
"It's Mr. Xu! But, which model should we choose to determine the model of the second-generation servo motor?"
Qin Jinshui solemnly recorded Xu Zhenming's request, and then let Xu Zhenming make a decision to determine the true model of the servo motor.
Xu Zhenming said without hesitation: "Do you want to talk about it? Of course you have to choose the No. 3 servo motor! The performance of this servo motor is much better than the old one, so choose it!"
"But Mr. Xu! The cost of this motor is also the highest!"
"Mr. Xu! Or we can determine two models at once, one is better and the other is almost!"
Qin Jinshui and Zheng Cheng reported the situation with a wry smile.
After Xu Zhenming heard this suggestion, he shook his head with a serious expression: "No! The second-generation servo motors must be the best. These motors will be used on CNC machine tools in the future, not careless! Moreover, our first-generation servo motors , And gradually weed out!"
"Yes! Mr. Xu!" Seeing Xu Zhenming's determination, Qin Jinshui and Zheng Cheng stopped persuading them.
The two of them immediately stood up, ready to clean up and leave Xu Zhenming's office.
At this time, Xu Zhenming waved his hand and said, "Minister Zheng! You immediately transfer the servo motor research and development work in your hand to Factory Manager Qin, ready to take over the research and development work of the automatic drilling and cutting production line!"
"Ah? Mr. Xu! There is a bottleneck in the research and development of the automatic drilling and cutting production line?" Zheng Cheng asked Xu Zhenming in surprise.
But Xu Zhenming smiled and shook his head: "On the contrary! This project has achieved certain results! However, it is precisely because of the results that we have to speed up the research and development speed and finalize the new product!"
"Okay Mr. Xu! I will listen to your arrangements!" Zheng Cheng nodded with a smile while sorting out the information.
Soon after, he handed over the materials and other materials to Qin Jinshui, and moved with Xu Zhenming to the test workshop for product development.
Workers in the test workshop are busy, lifting a 200*200 rectangular steel pipe and stacking it on the transport roller table of the automatic drilling and blanking production line.
At this time, the automatic drilling and blanking production line has been up and running, the transport roller table is running slowly, the hydraulic automatic punching machine, the CNC automatic drilling machine, the CNC sawing machine and other equipment are all running without load, making bursts of roar.
Sun Chao and members of his technical team, scattered at the node locations of various equipment, are observing the operation of the equipment."Mr. Xu! All the preparatory work has been completed, just waiting for the load test!" Seeing Xu Zhenming leading Zheng Cheng, Sun Chao reported the situation with a smile.
After Zheng Cheng was transferred to develop the servo motor project, his pressure was much greater.On the one hand, I want to engage in the project of automatic drilling and cutting production line, and on the other side, I have to work on the project of computerized cutting of clothing, which feels a bit powerless.
Xu Zhenming also knew his difficulties, so he transferred Zheng Cheng's technical team back to work on this production line."Assistant Sun! Start trial production!" He smiled and gave instructions to Sun Chao.
Hearing this, Sun Chaochao waved his hand to Wang Zhizhong, who was in charge of the general control, "Wang Gong can start!"
With a "pop", Wang Zhizhong hit the enter key.
"Woo..." The transport roller moved at high speed, rolling with a rectangular tube towards the centering device.Then it suddenly slowed down and stopped.The centering device starts to work, and the aligning roller table rolls left and right in both directions with the rectangular tube rolling toward the middle of the transport roller table.Immediately afterwards, the pneumatic actuator started to work, and the left and right arms emerged from the transportation roller table, clamping the rectangular tube package and sending it into the center of the processing station.
After this set of actions, all the conditions of the production line are normal.
The rectangular tube that enters the station is pushed by the transport roller table and quickly comes to the clamping machine position.The double clamping robot holds the rectangular tube tightly and waits for the CNC drilling machine and CNC punching machine to complete the punching operation.
I saw that in the four directions of the rectangular tube, dozens of drill bits protruded at the same time, rotating at high speed to start drilling.At the stations where the drill cannot be processed, the CNC punching machine is also working at the same time, punching holes.
This set of actions is also normal.
After five minutes have passed, the clamping robot sends the rectangular pipe that has been drilled to the processing station of the CNC sawing machine.The CNC sawing machine starts to work and cuts the rectangular tube.
At this point in the process, the main functions of this production line have been reflected.
In other words, the prototype of this automatic drilling and blanking production line has been successfully developed.
However, Xu Zhenming looked all the way, but his brows were still frowning.
