In the early morning of the next day, the bodyguard Xiao Jiang had already prepared the black Mercedes-Benz 600 and went to the living room on the first floor to wait.
"Why haven't you come down yet?" He looked at his watch anxiously, pacing in the living room.
It takes more than an hour to get to the Longbow Group from here, and there must be no accidents on the road.After he received Xu Zhenming's call last night, he has already begun to make preparations, check vehicles, organize travel route maps, and respond to emergencies.
But now, in his impression, Xu Zhenming, who has always been more agile in doing things, how could he procrastinate?
Xu Zhenming was also anxious at this time, and said to Yang Ting, who was standing beside him and tying herself a bow tie: "Forget it! I have changed three suits, so it's good to wear this one! Time is too late, um ..."
"Mr. Xu! Today is the first technical demonstration. The first impression you leave to all leaders is very important! The experts and leaders who drilled out of the mountain gougou will come to see you with colored glasses! Let's have one Stop them at the beginning!"
But Yang Ting tidied up Xu Zhenming's appearance without rushing.She finally changed Xu Zhenming into a beige Armani suit with a dark gray warm shirt and silver bow tie.
This kind of dress made Xu Zhenming five or six years old, and it seems that he has grown a lot.
After getting all this done, the two men walked down the stairs carrying a toolbox, a computer bag, a projector, and a lot of other materials.
Xiao Jiang saw Xu Zhenming walk down before daring to greet him and take what Xu Zhenming was holding.My lady and Xu Zhenming are so close, if he didn't get permission, how could he dare to rush to the second floor?
Probably because the morning was not smooth, it was still not smooth when entering the gate of Longbow Group!
Around 9:15 in the morning, Xu Zhenming and others came to the gate of Changgong Group.
The armed police soldiers in charge of security inspections have to carry out various routine inspections. They also call the staff of the security department to report to Xu Zhenming's big brother, computers, projectors, and toolboxes, so the instruments and meters are tested in all directions.
For example, Big Brother needs to do anti-monitoring testing, computers to do file testing and filing, computer floppy drive ports to be sealed, projectors to do anti-monitoring testing... and so on.And so on, even when Xu Zhenming drove to the Mercedes-Benz car, he had to be tested and parked in a designated location for isolation.
In short, very strict!
"Hey... I knew that, we should come over for routine testing an hour and a half in advance!" Seeing this situation, Yang Ting couldn't help feeling regretful.Seeing that Xu Zhenming's face was not so good, she was ready to take out her eldest brother to find acquaintances to intercede.
Xu Zhenming didn't speak, but shook his head slightly and stopped her with his eyes.If companies like Longbow Group can let go after interceding, then the country will be in big trouble!
Therefore, although Xu Zhenming was anxious, he was still waiting patiently.He had already called Gui Changjun to ask for leave, indicating that he was in serious trouble here and it might be delayed for about half an hour.
"Mr. Xu! Why didn't you come earlier? Hey... it can only be this way!" On the phone, Gui Changshu was a little dissatisfied with Xu Zhenming for the first time and wasted time.
This made Xu Zhenming's heart suddenly cast a shadow.
"Today's technology demonstration meeting will definitely not go smoothly! Otherwise, Gui Changshu will not say such a thing!" He Liushen wondered about today's results uncomfortably.
Thinking about it, he comforted himself in his heart: "It doesn't matter if you can't get the project support funds of the Longbow Group! What should I say today, just say it!"
Xu Zhenming came to do technical exchanges and demonstrations today to prepare to obtain a capital from the Longbow Group Company.Use this fund to do research and development of 5-axis linkage CNC machine tools.He was full of confidence at first, thinking that he could pull a hair from the thigh of the Longbow Group.
Now it seems that this idea is a bit unreliable!
In an anxious wait, security personnel in military uniforms finally completed testing of all Xu Zhenming's equipment, and they were all normal.Xu Zhenming and others were released.
He asked Xiao Jiang to send himself to the vicinity of the entrance of the equipment department building first, and then drive the vehicle back to the isolation area.
The security staff of the Longbow Group was not relieved and sent a female staff member to accompany her throughout the process. It was not until Xu Zhenming and Yang Ting entered the large conference room on the first floor with various instruments, computers and materials, she looked serious. go away.
"Why didn't you come until now?"
"Local businesses are just lazy!"
"You are just wasting our time!"
In the large conference room, the technicians who sat down to attend the meeting all accused Xu Zhenming.
Xu Zhenming came to the rostrum and smiled apologetically at the participants down the stage, "I'm sorry! I was delayed for some time during the security check!"
Immediately, he looked at Gui Changshu who was sitting near the rostrum and asked in a low voice: "Is your group company ready for the projector?"
"This...we didn't prepare! Do you still need a projector?"
A technician beside Gui Changshu shook his head.
"Why don't you use a projector for technical communication? Otherwise, the technical problem is not clear!"
Xu Zhenming looked at Gui Changshu in surprise.He thought that Gui Changshu had problems with the organization of this meeting and did not pay much attention to it.
"From this point of view, today's technology demonstration and exchange meeting must not go well!"
Xu Zhenming was worried.
Then he smiled apologetically at the attendees again, explaining that it would take a few minutes for everyone.
This made the machine tool experts who came from other places very dissatisfied.
An old man wearing reading glasses actually stood up and accused Xu Zhenming: "Does your Yiming Group Company do things like this? It's not like procrastination. According to your efficiency, you can still do research and development?"
This person is unshaven, and his hair is gray and messed like a chicken coop, like the director of the Five Rivers Research Institute.
Xu Zhenming glanced at the nameplate on his seat, and suddenly understood why these people were dissatisfied with Yiming Group Company!
These people are all subordinate units of the Longbow Group and rely on the group company to allocate funds to develop projects.And now, Yiming Group Corporation has set up a five-axis linkage CNC machine tool, which is to earn money from these people.How are they willing to do so?
While busy, Xu Zhenming glanced around with the corner of his eye and found that Director Zhang of Longshan Research Institute, General Manager Wang of Qinling Research Institute, and Director Sun of Wuhe Research Institute were the three who jumped the most fiercely!
"The three of them should have set up a project for the research and development of 5-axis CNC machine tools! If I succeed this time, their research and development funds will shrink! Hehe... Then I will do a good job today!"
The clay figurines are still three-pointed!
Xu Zhenming did not intend to obtain project R&D funds from the Longbow Group.He is here to advertise, and let us know in advance that Longbow Group, a super large user of five-axis linkage machine tools: Yiming Group has new products, hurry up and place an order!
And now, Xu Zhenming is annoyed by the group of technicians wearing colored glasses, so naturally he has to earn a lot of research and development funds from the Longbow Group!
Ten minutes later, he had already adjusted the projector, and the big screen was the white wall behind the podium.
"Leaders, engineers! My name is Xu Zhenming, and I am the project chief of Yiming Group's five-axis CNC machine tools! Now let me introduce the progress of our group company's research and development on five-axis CNC machine tools..."
Xu Zhenming told everyone that Yiming Group will build a four-axis semi-linked CNC machine tool prototype in three months; a five-axis CNC machine tool prototype will be produced in about eight months; and a super large five-axis CNC machine tool will be launched around December. machine tool.
These data are all demonstrated by PPT files, and are supported by many data such as color pictures, equipment prototype conception 3DS files, equipment prototype conception CAD files...etc.It can be said to be perfect, much better than the dry report documents that the average research institute produces!
"Shit... You Yiming Group Company brags not to draft, right? Three months later, come up with a pseudo five-axis linkage CNC machine tool?"
"Our institute has established a CNC machine tool project. It has been more than ten years now. So far we have not won a four-axis semi-CNC machine tool. Can you Yiming Group?"
"How many doctors does your unit have? How many masters and professors? Without these talents, can you come up with four-axis semi-CNC machine tools?"
Xu Zhenming's report has just ended, and there is no time to announce the free questioning session. There is already a voice of doubt from the seat under the rostrum.These people are experts and leaders who understand technology, and the questions raised are top-notch, with no problems with theory and logic!
Among them, Director Sun of the Five Rivers Research Institute, Director Zhang of the Longshan Research Institute, and Chief Engineer Wang of the Qinling Research Institute raised the most intense questions.
These three units are large research institutes and authoritative institutions under the Longbow Group.Director Sun, Director Zhang, and Mr. Wang are taking the lead, and everyone will naturally come out to support their views.
As a result, Yiming Group has become a target of public criticism.Xu Zhenming has also become everyone's target, to the point where everyone shouts.
Seeing this situation, Gui Changshu had to stand up and speak: "Comrades! Regarding the issue of four-axis and semi-CNC machine tools, I want to talk about a real situation. Not long ago, I was already in the factory of Yiming Group. See this equipment!"
"Ah! There is such a thing? Anyway, I don't believe it!"
"Many local companies, in order to report results and cheat the national policy, buy a foreigner's equipment to recharge!"
"Director Zhang is right! Many new projects of companies are fake and deceptive!"
After being slapped in the face by Gui Changshu, Director Sun, Director Zhang and Chief Engineer Wang were unwilling and still held a skeptical attitude.
They hold this kind of thinking, but after all, it's just a word of money.They are worried that the Longbow Group will reduce the funding, and the life of their unit will be difficult!
At this time, Xu Zhenming clicked on a small video on the laptop.
"Dear viewers, I am Sun Ya, a reporter from Jingshi TV Station! The super-large Longma milling machine behind me is a four-axis linkage machine tool developed by Yiming Group for Italian Danili. According to industry terms, this It is called a four-axis semi-linked CNC machine tool. It represents the most advanced technology in my country..."
This video was recorded by Jingshi TV Station and will be broadcast on science and technology programs.Xu Zhenming used it to show it, and it happened to wake up the experts below!
In the early morning of the next day, the bodyguard Xiao Jiang had already prepared the black Mercedes-Benz 600 and went to the living room on the first floor to wait.
"Why haven't you come down yet?" He looked at his watch anxiously, pacing in the living room.
It takes more than an hour to get to the Longbow Group from here, and there must be no accidents on the road.After he received Xu Zhenming's call last night, he has already begun to make preparations, check vehicles, organize travel route maps, and respond to emergencies.
But now, in his impression, Xu Zhenming, who has always been more agile in doing things, how could he procrastinate?
Xu Zhenming was also anxious at this time, and said to Yang Ting, who was standing beside him and tying herself a bow tie: "Forget it! I have changed three suits, so it's good to wear this one! Time is too late, um ..."
"Mr. Xu! Today is the first technical demonstration. The first impression you leave to all leaders is very important! The experts and leaders who drilled out of the mountain gougou will come to see you with colored glasses! Let's have one Stop them at the beginning!"
But Yang Ting tidied up Xu Zhenming's appearance without rushing.She finally changed Xu Zhenming into a beige Armani suit with a dark gray warm shirt and silver bow tie.
This kind of dress made Xu Zhenming five or six years old, and it seems that he has grown a lot.
After getting all this done, the two men walked down the stairs carrying a toolbox, a computer bag, a projector, and a lot of other materials.
Xiao Jiang saw Xu Zhenming walk down before daring to greet him and take what Xu Zhenming was holding.My lady and Xu Zhenming are so close, if he didn't get permission, how could he dare to rush to the second floor?
Probably because the morning was not smooth, it was still not smooth when entering the gate of Longbow Group!
Around 9:15 in the morning, Xu Zhenming and others came to the gate of Changgong Group.
The armed police soldiers in charge of security inspections have to carry out various routine inspections. They also call the staff of the security department to report to Xu Zhenming's big brother, computers, projectors, and toolboxes, so the instruments and meters are tested in all directions.
For example, Big Brother needs to do anti-monitoring testing, computers to do file testing and filing, computer floppy drive ports to be sealed, projectors to do anti-monitoring testing... and so on.And so on, even when Xu Zhenming drove to the Mercedes-Benz car, he had to be tested and parked in a designated location for isolation.
In short, very strict!
"Hey... I knew that, we should come over for routine testing an hour and a half in advance!" Seeing this situation, Yang Ting couldn't help feeling regretful.Seeing that Xu Zhenming's face was not so good, she was ready to take out her eldest brother to find acquaintances to intercede.
Xu Zhenming didn't speak, but shook his head slightly and stopped her with his eyes.If companies like Longbow Group can let go after interceding, then the country will be in big trouble!
Therefore, although Xu Zhenming was anxious, he was still waiting patiently.He had already called Gui Changjun to ask for leave, indicating that he was in serious trouble here and it might be delayed for about half an hour.
"Mr. Xu! Why didn't you come earlier? Hey... it can only be this way!" On the phone, Gui Changshu was a little dissatisfied with Xu Zhenming for the first time and wasted time.
This made Xu Zhenming's heart suddenly cast a shadow.
"Today's technology demonstration meeting will definitely not go smoothly! Otherwise, Gui Changshu will not say such a thing!" He Liushen wondered about today's results uncomfortably.
Thinking about it, he comforted himself in his heart: "It doesn't matter if you can't get the project support funds of the Longbow Group! What should I say today, just say it!"
Xu Zhenming came to do technical exchanges and demonstrations today to prepare to obtain a capital from the Longbow Group Company.Use this fund to do research and development of 5-axis linkage CNC machine tools.He was full of confidence at first, thinking that he could pull a hair from the thigh of the Longbow Group.
Now it seems that this idea is a bit unreliable!
In an anxious wait, security personnel in military uniforms finally completed testing of all Xu Zhenming's equipment, and they were all normal.Xu Zhenming and others were released.
He asked Xiao Jiang to send himself to the vicinity of the entrance of the equipment department building first, and then drive the vehicle back to the isolation area.
The security staff of the Longbow Group was not relieved and sent a female staff member to accompany her throughout the process. It was not until Xu Zhenming and Yang Ting entered the large conference room on the first floor with various instruments, computers and materials, she looked serious. go away.
"Why didn't you come until now?"
"Local businesses are just lazy!"
"You are just wasting our time!"
In the large conference room, the technicians who sat down to attend the meeting all accused Xu Zhenming.
Xu Zhenming came to the rostrum and smiled apologetically at the participants down the stage, "I'm sorry! I was delayed for some time during the security check!"
Immediately, he looked at Gui Changshu who was sitting near the rostrum and asked in a low voice: "Is your group company ready for the projector?"
"This...we didn't prepare! Do you still need a projector?"
A technician beside Gui Changshu shook his head.
"Why don't you use a projector for technical communication? Otherwise, the technical problem is not clear!"
Xu Zhenming looked at Gui Changshu in surprise.He thought that Gui Changshu had problems with the organization of this meeting and did not pay much attention to it.
"From this point of view, today's technology demonstration and exchange meeting must not go well!"
Xu Zhenming was worried.
Then he smiled apologetically at the attendees again, explaining that it would take a few minutes for everyone.
This made the machine tool experts who came from other places very dissatisfied.
An old man wearing reading glasses actually stood up and accused Xu Zhenming: "Does your Yiming Group Company do things like this? It's not like procrastination. According to your efficiency, you can still do research and development?"
This person is unshaven, and his hair is gray and messed like a chicken coop, like the director of the Five Rivers Research Institute.
Xu Zhenming glanced at the nameplate on his seat, and suddenly understood why these people were dissatisfied with Yiming Group Company!
These people are all subordinate units of the Longbow Group and rely on the group company to allocate funds to develop projects.And now, Yiming Group Corporation has set up a five-axis linkage CNC machine tool, which is to earn money from these people.How are they willing to do so?
While busy, Xu Zhenming glanced around with the corner of his eye and found that Director Zhang of Longshan Research Institute, General Manager Wang of Qinling Research Institute, and Director Sun of Wuhe Research Institute were the three who jumped the most fiercely!
"The three of them should have set up a project for the research and development of 5-axis CNC machine tools! If I succeed this time, their research and development funds will shrink! Hehe... Then I will do a good job today!"
The clay figurines are still three-pointed!
Xu Zhenming did not intend to obtain project R&D funds from the Longbow Group.He is here to advertise, and let us know in advance that Longbow Group, a super large user of five-axis linkage machine tools: Yiming Group has new products, hurry up and place an order!
And now, Xu Zhenming is annoyed by the group of technicians wearing colored glasses, so naturally he has to earn a lot of research and development funds from the Longbow Group!
Ten minutes later, he had already adjusted the projector, and the big screen was the white wall behind the podium.
"Leaders, engineers! My name is Xu Zhenming, and I am the project chief of Yiming Group's five-axis CNC machine tools! Now let me introduce the progress of our group company's research and development on five-axis CNC machine tools..."
Xu Zhenming told everyone that Yiming Group will build a four-axis semi-linked CNC machine tool prototype in three months; a five-axis CNC machine tool prototype will be produced in about eight months; and a super large five-axis CNC machine tool will be launched around December. machine tool.
These data are all demonstrated by PPT files, and are supported by many data such as color pictures, equipment prototype conception 3DS files, equipment prototype conception CAD files...etc.It can be said to be perfect, much better than the dry report documents that the average research institute produces!
"Shit... You Yiming Group Company brags not to draft, right? Three months later, come up with a pseudo five-axis linkage CNC machine tool?"
"Our institute has established a CNC machine tool project. It has been more than ten years now. So far we have not won a four-axis semi-CNC machine tool. Can you Yiming Group?"
"How many doctors does your unit have? How many masters and professors? Without these talents, can you come up with four-axis semi-CNC machine tools?"
Xu Zhenming's report has just ended, and there is no time to announce the free questioning session. There is already a voice of doubt from the seat under the rostrum.These people are experts and leaders who understand technology, and the questions raised are top-notch, with no problems with theory and logic!
Among them, Director Sun of the Five Rivers Research Institute, Director Zhang of the Longshan Research Institute, and Chief Engineer Wang of the Qinling Research Institute raised the most intense questions.
These three units are large research institutes and authoritative institutions under the Longbow Group.Director Sun, Director Zhang, and Mr. Wang are taking the lead, and everyone will naturally come out to support their views.
As a result, Yiming Group has become a target of public criticism.Xu Zhenming has also become everyone's target, to the point where everyone shouts.
Seeing this situation, Gui Changshu had to stand up and speak: "Comrades! Regarding the issue of four-axis and semi-CNC machine tools, I want to talk about a real situation. Not long ago, I was already in the factory of Yiming Group. See this equipment!"
"Ah! There is such a thing? Anyway, I don't believe it!"
"Many local companies, in order to report results and cheat the national policy, buy a foreigner's equipment to recharge!"
"Director Zhang is right! Many new projects of companies are fake and deceptive!"
After being slapped in the face by Gui Changshu, Director Sun, Director Zhang and Chief Engineer Wang were unwilling and still held a skeptical attitude.
They hold this kind of thinking, but after all, it's just a word of money.They are worried that the Longbow Group will reduce the funding, and the life of their unit will be difficult!
At this time, Xu Zhenming clicked on a small video on the laptop.
"Dear viewers, I am Sun Ya, a reporter from Jingshi TV Station! The super-large Longma milling machine behind me is a four-axis linkage machine tool developed by Yiming Group for Italian Danili. According to industry terms, this It is called a four-axis semi-linked CNC machine tool. It represents the most advanced technology in my country..."
This video was recorded by Jingshi TV Station and will be broadcast on science and technology programs.Xu Zhenming used it to show it, and it happened to wake up the experts below!
