Zhang Fatty Zhang Gui, of course, agrees with Xu Zhenming's proposal. If he can earn two wages, whoever disagrees is stupid!
The next day, together with Xu Zhenming, he moved to two duty rooms in the machine repair shop and became neighbors again.
After setting up the bed, Xu Zhenming summoned all the employees who followed him to the meeting room of the workshop and held a short meeting for everyone.He stood on the rostrum. Director Ma, Chairman Han and several workshop leaders could only sit behind the small desk under the rostrum at this time.
Seeing this scene, these laid-off workers knew that Xu Zhenming, who had contracted the machine repair workshop, was already a small boss.They all listened quietly to Xu Zhenming's arrangement of work, and everyone was smiling.Because they have already got good news from Director Ma.
"Masters! Starting tomorrow, we will start three shifts! Director Ma, Director Liu, Director Sun, and Master Li Quan, the four of you are the monitors of the class and rotate with the four classes. Each of you has three day shifts. Three night shifts, and three small night shifts! The goal is to earn back my wages, so I don’t want to lose money..."
At this time, Xu Zhenming began the mobilization before order production.He has rich experience in his position. He has been a manager of a factory with thousands of people, and he has led these dozens of people to fight the world.
After a meeting, everyone seemed to be beaten up.Because Xu Zhenming has a process working hour system.As long as it is overproduction, there will be bonuses.Good benefits, work overtime during the National Day, one day counts as three days!
The power of money is really amazing, and the equipment in the machine repair shop has been maintained before it's time for work, ready to be put into use.Under the leadership of Director Ma, everyone divided the machine repair car into two areas, one for the workers who were not laid off, and the other for Xu Zhenming's site.
At about 10 am the next morning, Suning High Gear sent three heavy trucks to deliver 100 tons of heavy long shafts and ring parts.Everyone happily unloaded the workpiece blank from the car, and started to clamp the workpiece according to the command of the leader Ma.
Fortunately, these mechanics are experienced veterans, proficient in turning, milling, planing and other machine operations.It is a piece of cake for them to give the rough piece a rough knife.
For the heavy-duty long-shaft napping tool, it usually takes three shifts to complete the rough turning of a workpiece.Some factories adopt a day shift system, and spend time to re-calibrate the tool before starting the machine tool.
Xu Zhenming arranged three shifts in a row, so there was no such problem.It took only two and a half shifts to complete the first batch of workpieces.
At eight o'clock in the morning on October 4, Director Ma, who came to take over, unloaded the first batch of heavy long axles from the four large sleeping cars.The processing efficiency exceeded Xu Zhenming's prediction.He took the instrument to measure it, but found the problem.He pointed to the test data and told Director Ma:
"These four long shafts have a degree of withdrawal. Fortunately, there is a margin of 2 mm in the smallest part, otherwise they will be scrapped!"
Director Ma was in a cold sweat at the time.
The degree of withdrawal is also called the size of the head, which is a common problem in the machining of long shafts.Some are due to machine tools, and some are due to tool wear.
"It's the tool! In order to keep up with the progress, everyone has eaten too much knife! I have been tracking the processing progress!"
Xu Zhenming told everyone the reason he had speculated.
After listening, Director Ma said in a negotiating tone: "Xiao Xu, or else: the amount of knife for the first knife and the second knife of the napping is changed to 1.5 mm; after the smooth surface appears, let's go deeper!"
"The processing technology sheet I give you is also the same! I know everyone's mood, and they all want to work faster. However, we are in the machining industry, and violation of the process will be counterproductive!"
Xu Zhenming warned everyone.He didn't want to mess up things in order to earn half a class more money.
The old workers in the first class blushed in embarrassment after hearing this sentence.Only now did they know that their little boss is also proficient in machining, not a layman, and the production process of weaving is very scientific!
In fact, Xu Zhenming had discovered the problem a long time ago, and he used facts only because he was afraid of saying nothing.In this way, Director Ma was also convinced and followed the arrangements of his disciples to work.
Four days later, the first batch of 100 tons of shaft and ring blank workpieces have been processed.The shaving iron in the workshop has been piled up like a hill, estimated to exceed 20 tons.
Boss Wang of Suning Foundry came to the machine repair shop with cash and two large trucks.
He specializes in matching with Suning High Gear, buying back alloy scrap and re-smelting it, and forging it into a blank to supply Suning High Gear.According to Xu Zhenming's request, he claimed to be Suning Gaojia to recover the shaving iron.
"The current alloy steel is 6,800 a ton, and I will give you 1,600 a ton of shaving iron, is that okay?"
Boss Wang discussed with Xu Zhenming.He saw that Xu Zhenming was an insider, and he did not dare to make a false price.
"Look at the workpieces in my workshop. There is no plain carbon steel! Buy these shaving irons. You don't need to add alloy to adjust the alloy content! Boss Wang, the price is 1,800 one ton, you take it all away! "Xu Zhenming spoke with facts.
"1700 yuan a ton!"
"1750 yuan! Take it away!"
"Well, that's it! Boss Xu, I only made you two hundred yuan a ton!" Boss Wang grinned and exclaimed.
Xu Zhenming is not greedy about how much he can earn.He only earns the money he deserves!
The shaving iron is soaked cargo, and only two large heavy trucks can load more than 20 tons of cargo.When he left the gate, the guard at the factory stopped Xu Zhenming and two large trucks with shaving iron.
"Master Qing, this is the contract agreement, this is the exit permit, let us let our vehicles go!" Xu Zhenming walked up to negotiate with various formalities.
Master Men Weiqing is the small leader of the Security Department and the person in charge of the day guard.He is an educated youth in the magic capital who has recruited Nan'an Towel Factory, and Cai Boling is a fellow.
"No! You ask our section chief to call me before I can let it go! So much shaving iron has to leave the factory door, if I make a mistake, I can't eat it!"
After carefully reading the exit permit issued by the factory office, Master Qing still did not agree to release.
Seeing this, Xu Zhenming sensed a hint of conspiracy: Someone wanted to spread the story of his shaving iron sales!
Who is this guy?
"Is these procedures not in compliance with the regulations?" Thinking of this, Xu Zhenming still asked angrily.
"The procedure is okay! There are so many things, I dare not take this responsibility!"
"You don't dare to take the responsibility and get laid off as soon as possible. You can eat dry food here?"
"Little chick! What does it matter to you whether I am laid off?"
"Keep your mouth clean and eat dry food! The Nan'an towel quilt factory is dragged down by your dry food!"
"What's wrong with you, I'll hit you!"
Master Qing was finally agitated by Xu Zhenming, and while yelling, he wanted to hit Xu Zhenming with his hands.
Zhang Fatty Zhang Gui, of course, agrees with Xu Zhenming's proposal. If he can earn two wages, whoever disagrees is stupid!
The next day, together with Xu Zhenming, he moved to two duty rooms in the machine repair shop and became neighbors again.
After setting up the bed, Xu Zhenming summoned all the employees who followed him to the meeting room of the workshop and held a short meeting for everyone.He stood on the rostrum. Director Ma, Chairman Han and several workshop leaders could only sit behind the small desk under the rostrum at this time.
Seeing this scene, these laid-off workers knew that Xu Zhenming, who had contracted the machine repair workshop, was already a small boss.They all listened quietly to Xu Zhenming's arrangement of work, and everyone was smiling.Because they have already got good news from Director Ma.
"Masters! Starting tomorrow, we will start three shifts! Director Ma, Director Liu, Director Sun, and Master Li Quan, the four of you are the monitors of the class and rotate with the four classes. Each of you has three day shifts. Three night shifts, and three small night shifts! The goal is to earn back my wages, so I don’t want to lose money..."
At this time, Xu Zhenming began the mobilization before order production.He has rich experience in his position. He has been a manager of a factory with thousands of people, and he has led these dozens of people to fight the world.
After a meeting, everyone seemed to be beaten up.Because Xu Zhenming has a process working hour system.As long as it is overproduction, there will be bonuses.Good benefits, work overtime during the National Day, one day counts as three days!
The power of money is really amazing, and the equipment in the machine repair shop has been maintained before it's time for work, ready to be put into use.Under the leadership of Director Ma, everyone divided the machine repair car into two areas, one for the workers who were not laid off, and the other for Xu Zhenming's site.
At about 10 am the next morning, Suning High Gear sent three heavy trucks to deliver 100 tons of heavy long shafts and ring parts.Everyone happily unloaded the workpiece blank from the car, and started to clamp the workpiece according to the command of the leader Ma.
Fortunately, these mechanics are experienced veterans, proficient in turning, milling, planing and other machine operations.It is a piece of cake for them to give the rough piece a rough knife.
For the heavy-duty long-shaft napping tool, it usually takes three shifts to complete the rough turning of a workpiece.Some factories adopt a day shift system, and spend time to re-calibrate the tool before starting the machine tool.
Xu Zhenming arranged three shifts in a row, so there was no such problem.It took only two and a half shifts to complete the first batch of workpieces.
At eight o'clock in the morning on October 4, Director Ma, who came to take over, unloaded the first batch of heavy long axles from the four large sleeping cars.The processing efficiency exceeded Xu Zhenming's prediction.He took the instrument to measure it, but found the problem.He pointed to the test data and told Director Ma:
"These four long shafts have a degree of withdrawal. Fortunately, there is a margin of 2 mm in the smallest part, otherwise they will be scrapped!"
Director Ma was in a cold sweat at the time.
The degree of withdrawal is also called the size of the head, which is a common problem in the machining of long shafts.Some are due to machine tools, and some are due to tool wear.
"It's the tool! In order to keep up with the progress, everyone has eaten too much knife! I have been tracking the processing progress!"
Xu Zhenming told everyone the reason he had speculated.
After listening, Director Ma said in a negotiating tone: "Xiao Xu, or else: the amount of knife for the first knife and the second knife of the napping is changed to 1.5 mm; after the smooth surface appears, let's go deeper!"
"The processing technology sheet I give you is also the same! I know everyone's mood, and they all want to work faster. However, we are in the machining industry, and violation of the process will be counterproductive!"
Xu Zhenming warned everyone.He didn't want to mess up things in order to earn half a class more money.
The old workers in the first class blushed in embarrassment after hearing this sentence.Only now did they know that their little boss is also proficient in machining, not a layman, and the production process of weaving is very scientific!
In fact, Xu Zhenming had discovered the problem a long time ago, and he used facts only because he was afraid of saying nothing.In this way, Director Ma was also convinced and followed the arrangements of his disciples to work.
Four days later, the first batch of 100 tons of shaft and ring blank workpieces have been processed.The shaving iron in the workshop has been piled up like a hill, estimated to exceed 20 tons.
Boss Wang of Suning Foundry came to the machine repair shop with cash and two large trucks.
He specializes in matching with Suning High Gear, buying back alloy scrap and re-smelting it, and forging it into a blank to supply Suning High Gear.According to Xu Zhenming's request, he claimed to be Suning Gaojia to recover the shaving iron.
"The current alloy steel is 6,800 a ton, and I will give you 1,600 a ton of shaving iron, is that okay?"
Boss Wang discussed with Xu Zhenming.He saw that Xu Zhenming was an insider, and he did not dare to make a false price.
"Look at the workpieces in my workshop. There is no plain carbon steel! Buy these shaving irons. You don't need to add alloy to adjust the alloy content! Boss Wang, the price is 1,800 one ton, you take it all away! "Xu Zhenming spoke with facts.
"1700 yuan a ton!"
"1750 yuan! Take it away!"
"Well, that's it! Boss Xu, I only made you two hundred yuan a ton!" Boss Wang grinned and exclaimed.
Xu Zhenming is not greedy about how much he can earn.He only earns the money he deserves!
The shaving iron is soaked cargo, and only two large heavy trucks can load more than 20 tons of cargo.When he left the gate, the guard at the factory stopped Xu Zhenming and two large trucks with shaving iron.
"Master Qing, this is the contract agreement, this is the exit permit, let us let our vehicles go!" Xu Zhenming walked up to negotiate with various formalities.
Master Men Weiqing is the small leader of the Security Department and the person in charge of the day guard.He is an educated youth in the magic capital who has recruited Nan'an Towel Factory, and Cai Boling is a fellow.
"No! You ask our section chief to call me before I can let it go! So much shaving iron has to leave the factory door, if I make a mistake, I can't eat it!"
After carefully reading the exit permit issued by the factory office, Master Qing still did not agree to release.
Seeing this, Xu Zhenming sensed a hint of conspiracy: Someone wanted to spread the story of his shaving iron sales!
Who is this guy?
"Is these procedures not in compliance with the regulations?" Thinking of this, Xu Zhenming still asked angrily.
"The procedure is okay! There are so many things, I dare not take this responsibility!"
"You don't dare to take the responsibility and get laid off as soon as possible. You can eat dry food here?"
"Little chick! What does it matter to you whether I am laid off?"
"Keep your mouth clean and eat dry food! The Nan'an towel quilt factory is dragged down by your dry food!"
"What's wrong with you, I'll hit you!"
Master Qing was finally agitated by Xu Zhenming, and while yelling, he wanted to hit Xu Zhenming with his hands.
