While everyone was talking about Xu Zhenming, Xu Zhenming and Gao Jianjun had arrived in the car of Toyota Bullets.Er Liu drove the Toyota bullet out of the east gate of the China Plate Plant and drove towards the No. 1 Machinery Repair Plant of Nan'an Iron and Steel Group Corporation.
On the way, Gao Jianjun rubbed his temples, although his face was full of smiles, he looked a little tired.
These days, he has been living in anxiety.Now, the localization of the rolls of the 2200 roughing mill has finally taken a big step, and his tight heartstrings are going to relax a lot.Looking at Xu Zhenming next to him, he smiled and asked, "Xiao Xu, you said that this time I make a new rough roll, what proportion of alloy formula should I use?"
"Elder Gao! Since you are not sure, I suggest you first list ten batches of formulas and take turns to make new products to test!"
Xu Zhenming is not a metallurgical expert, so he will not do things that don't know how to pretend to understand and tell his own ideas.
His method is very common, and it is done in many scientific enterprises.In order to obtain a set of key data, some companies may have to do thousands, tens of thousands, or even more experiments.Scientific research must not be sloppy or bragging.
However, domestic enterprises cannot support so many research experiments due to the limitations of funds and test conditions. The results can be imagined.
"Ten batches of formulas! Hey... The funds for this project are limited, I'm afraid it won't be enough for ten experiments!" At this time, Gao Jianjun said with a wry smile.The crow's feet in the corners of his eyes became deeper and deeper, and his face was full of fatigue.
Knowing this situation, Xu Zhenming had no choice.Although he wanted to help Gao Jianjun, Yiming was even more unable to support such an experiment.Thinking of this, he smiled and comforted Gao Jianjun:
"Gao Lao, or let's use the elimination method to do the experiment. For the first time, we will try to manufacture three follower rolls. The data of the highest one, the lowest one, and the data of the last one take the middle value. In this way, the first When the two batches were tested, the scope was reduced a lot!"
This is no alternative!In fact, the formula of alloy materials is not a simple mathematical problem. This kind of experimentation with mathematical methods is no different from drawing prizes.
Gao Jianjun also knows this truth.However, he was not reconciled. He wanted to complete the topic of localization of rolls before retiring, which could be regarded as an end to his career.Thinking of this, he yawned and asked Xu Zhenming: "Xiao Xu! How about I entrust these three roughing rolls for experimentation to you?"
"Should we cast and forge the blanks ourselves?"
"Of course! Forgings must be used!"
Gao Jianjun exhorted him with breath.
Because he had just trial-produced new rolls, he was more careful, and he didn't worry about using alloy cast steel blanks to process them.More than a decade later, many rough rolls are made of high chromium alloy steel castings.At that time, the Chinese had mastered the technology, supported by the data theory, and selected the materials they wanted!
Xu Zhenming was very moved to see Gao Jianjun being so exhausted and still worrying about his work.He smiled and said: "Old man! Don't worry: I will do what you want! Old man, you should have a good rest!"
"Hey... Don't worry!"
Gao Jianjun sighed, slowly closed his eyes, leaned on his seat and closed his eyes to rest.
Not long after, Xu Zhenming's car came to the compound of the No. 1 Machinery Repair Factory.At this time, Gao Jianjun was already snoring like thunder.Seeing this situation, Xu Zhenming couldn't bear to wake up this sixtieth old man.
However, as soon as the vehicle stopped, Gao Jianjun suddenly woke up.He smiled apologetically at Xu Zhenming: "Xiao Xu, thank you for giving me a ride. It feels much better after a small squint! Hey, it's not good to refuse to accept the old. I think that when I made steel, I didn't sleep for three days and three nights. no problem……"
Gao Jianjun shook hands with Xu Zhenming and said goodbye while telling the story of the year.In the end, he was still worried about trying out new rough rolls, and told Xu Zhenming: "Xiao Xu, tomorrow will be the same, I will be stationed in the factory to supervise the production!"
"Good old man! I will send a driver to pick you up!"
Xu Zhenming was moved by the serious and persistent spirit of the old man and promised that he would pay attention to this subject until the experiment was successful.
"Mr. Xu! This old man is really a bit stupid, he has to retire and he is so desperate!" On the way back, Er Liu said in a bit of surprise.
When Xu Zhenming heard this, he warned No. 2 Liu with a bit of displeasure: "The industrialization of Huaxia Kingdom was done by the stupid people of their generation! Without the predecessors planting trees, how can we later generations take advantage of the truth?"
Seeing that his little boss was upset, Er Liu quickly blushed and explained, finding some reason to excuse himself.Xu Zhenming knew his character, and did not take Er Liu's words to heart.As the two talked, the Toyota Bullet had already rushed into the compound of Yiming Company.
Xu Zhenming drove straight to the light factory when he got out of the car, wanting to see the debugging of the 64-head computerized embroidery machine and the 128-head computerized embroidery machine.
Before going to the Nan'an Iron and Steel Group's Medium Plate Plant, he had already received a call from Li Quan.Li Quan told him: The 64-head and 128-head computerized embroidery machines have been assembled, and the initial commissioning is successful, and they are waiting for trial production to embroider garments.
Before Xu Zhenming stepped into the door of the factory, he heard rounds of warm applause.Seeing this, he couldn't help laughing.Don't guess, these two large computerized embroidery machines have been successfully debugged and are in trial production.Thinking of this, he quickened his pace and walked into the gate of the light factory.
"The computerized embroidery machine produced by our company is fast, much better than the imported one from our old factory!"
"Yiming produces, it must be a boutique! Haha..."
"The computer embroidery machine in the old factory has a high failure rate, often breaks and skips stitches, and cannot compare with the products we developed!"
At this time, the technicians involved in the research and development all laughed loudly.
They all pointed, walking around in front of the two large embroidery machines, venting their inner excitement.
Wu Yan, Zhao Lan and other sales staff are busy taking pictures of two computerized embroidery machines.These people still have the task of adding pictures of 64-head and 128-head computerized embroidery machines into the data.
In the workshop, these two large-scale computerized embroidery machines lined up with a length of tens of meters, spraying 15-color "YM" patterns at high speed.On the white plexiglass work surface, the lined towels and Yiming company work clothes have been embroidered with LOGO patterns.
The pattern is neat and there are no thread burrs.This situation shows that the performance of the 64-head and 128-head computerized embroidery machines is very stable, and there is no thread breakage or skipped stitches!
Seeing this situation, Xu Zhenming smiled and nodded.
Yiming has developed to this day and finally has a decent product.These two large-scale computerized embroidery machines are unique today, and there are only these two products in the world.This kind of technology will not appear until more than ten years later!
Moreover, only these two large-scale computerized embroidery machines can be regarded as important intelligent equipment in the textile and apparel industry, and they will not be eliminated after more than 20 years.
"Boss Xiao Xu! Now that the two large-scale computerized embroidery machines have been successfully developed, shall we start production immediately?"
At this time, Sun Ziliang, who was visiting, walked to Xu Zhenming's side with a smile, congratulated Xu Zhenming, and made suggestions to Xu Zhenming.He still maintains the old idea that if the product is good, it can be mass produced.This concept is different from the market economy concept of order-based production, and it is out of date.
Hearing his question, Wu Yan, Zhao Lan and others who were standing nearby cast questioning eyes.The two of them are engaged in sales, and of course hope that the company can produce some large-scale computerized embroidery machines to facilitate their sales work.
"No! The cost of this large-scale computerized embroidery machine is too high, and it can only be produced on order! Moreover, ordinary enterprises cannot afford this large-scale equipment, and it is estimated that they will not be able to sell a few sets a year!"
Looking at the faces of everyone, Xu Zhenming smiled and answered Sun Ziliang's question.
Fatty Zhang Gui is the product manager, and he is most concerned about the sales volume of his products.When he heard that this kind of large-scale computerized embroidery machine was not easy to sell, he couldn't help asking Xu Zhenming with disappointment: "Then why should we be thankless to develop such a product without a market?"
"We want to use this large-scale equipment to prove our strength! Let customers rest assured! Then they will pay for domestic products and buy our small computerized embroidery machine!"
Xu Zhenming explained the plan in his mind to everyone.Although he doesn't understand marketing, the truth in his words contains a marketing strategy.
Wu Yan heard the meaning of Xu Zhenming's words, and a strange light gleamed in her big pretty eyes.Her cheeks flushed slightly, and she peeked at Xu Zhenming standing in the crowd from time to time.
At this time, Xu Zhenming began to arrange tasks.
He arranged for Li Quan and Zhang Gui to be responsible for the aging of these two large computerized embroidery machines without stopping the machine 24 hours a day.On January 12, five small computerized embroidery machines and two large computerized embroidery machines must be packaged and shipped directly to the Modu International Convention and Exhibition Center.
Wu Yan's task is also very heavy. She is responsible for preparing Yiming's promotional materials, advertising color pages for computer embroidery machines, and arranging various exhibits for trade fairs... etc.
The boss gave an order and the employees ran off!
After receiving Xu Zhenming's order, the technicians and sales staff at the scene reduced their smiles and started to get busy.
Wu Yan also deliberately pursed her red lips and murmured, "Mr. Xu regards me as a scalper. He has arranged so many tasks at once and can't remember it. How can I finish it!"
She was deliberately saying something to complain, trying to get Xu Zhenming's attention.
After Xu Zhenming gave an order, he left the light-duty factory and prepared to hold a technical seminar.
The fat man was attracted by Wu Yan's complaints, and said with a smile of hippie: "Dame Wu! If you are too busy, just say hello, and the niche is on call!"
"Fuck you! You are too busy with your own affairs, and are you still thinking about helping grandma and aunt?"
Wu Yan stunned the fat man, twisting his beautiful waist and left.
There was bursts of laughter in the light factory.
While everyone was talking about Xu Zhenming, Xu Zhenming and Gao Jianjun had arrived in the car of Toyota Bullets.Er Liu drove the Toyota bullet out of the east gate of the China Plate Plant and drove towards the No. 1 Machinery Repair Plant of Nan'an Iron and Steel Group Corporation.
On the way, Gao Jianjun rubbed his temples, although his face was full of smiles, he looked a little tired.
These days, he has been living in anxiety.Now, the localization of the rolls of the 2200 roughing mill has finally taken a big step, and his tight heartstrings are going to relax a lot.Looking at Xu Zhenming next to him, he smiled and asked, "Xiao Xu, you said that this time I make a new rough roll, what proportion of alloy formula should I use?"
"Elder Gao! Since you are not sure, I suggest you first list ten batches of formulas and take turns to make new products to test!"
Xu Zhenming is not a metallurgical expert, so he will not do things that don't know how to pretend to understand and tell his own ideas.
His method is very common, and it is done in many scientific enterprises.In order to obtain a set of key data, some companies may have to do thousands, tens of thousands, or even more experiments.Scientific research must not be sloppy or bragging.
However, domestic enterprises cannot support so many research experiments due to the limitations of funds and test conditions. The results can be imagined.
"Ten batches of formulas! Hey... The funds for this project are limited, I'm afraid it won't be enough for ten experiments!" At this time, Gao Jianjun said with a wry smile.The crow's feet in the corners of his eyes became deeper and deeper, and his face was full of fatigue.
Knowing this situation, Xu Zhenming had no choice.Although he wanted to help Gao Jianjun, Yiming was even more unable to support such an experiment.Thinking of this, he smiled and comforted Gao Jianjun:
"Gao Lao, or let's use the elimination method to do the experiment. For the first time, we will try to manufacture three follower rolls. The data of the highest one, the lowest one, and the data of the last one take the middle value. In this way, the first When the two batches were tested, the scope was reduced a lot!"
This is no alternative!In fact, the formula of alloy materials is not a simple mathematical problem. This kind of experimentation with mathematical methods is no different from drawing prizes.
Gao Jianjun also knows this truth.However, he was not reconciled. He wanted to complete the topic of localization of rolls before retiring, which could be regarded as an end to his career.Thinking of this, he yawned and asked Xu Zhenming: "Xiao Xu! How about I entrust these three roughing rolls for experimentation to you?"
"Should we cast and forge the blanks ourselves?"
"Of course! Forgings must be used!"
Gao Jianjun exhorted him with breath.
Because he had just trial-produced new rolls, he was more careful, and he didn't worry about using alloy cast steel blanks to process them.More than a decade later, many rough rolls are made of high chromium alloy steel castings.At that time, the Chinese had mastered the technology, supported by the data theory, and selected the materials they wanted!
Xu Zhenming was very moved to see Gao Jianjun being so exhausted and still worrying about his work.He smiled and said: "Old man! Don't worry: I will do what you want! Old man, you should have a good rest!"
"Hey... Don't worry!"
Gao Jianjun sighed, slowly closed his eyes, leaned on his seat and closed his eyes to rest.
Not long after, Xu Zhenming's car came to the compound of the No. 1 Machinery Repair Factory.At this time, Gao Jianjun was already snoring like thunder.Seeing this situation, Xu Zhenming couldn't bear to wake up this sixtieth old man.
However, as soon as the vehicle stopped, Gao Jianjun suddenly woke up.He smiled apologetically at Xu Zhenming: "Xiao Xu, thank you for giving me a ride. It feels much better after a small squint! Hey, it's not good to refuse to accept the old. I think that when I made steel, I didn't sleep for three days and three nights. no problem……"
Gao Jianjun shook hands with Xu Zhenming and said goodbye while telling the story of the year.In the end, he was still worried about trying out new rough rolls, and told Xu Zhenming: "Xiao Xu, tomorrow will be the same, I will be stationed in the factory to supervise the production!"
"Good old man! I will send a driver to pick you up!"
Xu Zhenming was moved by the serious and persistent spirit of the old man and promised that he would pay attention to this subject until the experiment was successful.
"Mr. Xu! This old man is really a bit stupid, he has to retire and he is so desperate!" On the way back, Er Liu said in a bit of surprise.
When Xu Zhenming heard this, he warned No. 2 Liu with a bit of displeasure: "The industrialization of Huaxia Kingdom was done by the stupid people of their generation! Without the predecessors planting trees, how can we later generations take advantage of the truth?"
Seeing that his little boss was upset, Er Liu quickly blushed and explained, finding some reason to excuse himself.Xu Zhenming knew his character, and did not take Er Liu's words to heart.As the two talked, the Toyota Bullet had already rushed into the compound of Yiming Company.
Xu Zhenming drove straight to the light factory when he got out of the car, wanting to see the debugging of the 64-head computerized embroidery machine and the 128-head computerized embroidery machine.
Before going to the Nan'an Iron and Steel Group's Medium Plate Plant, he had already received a call from Li Quan.Li Quan told him: The 64-head and 128-head computerized embroidery machines have been assembled, and the initial commissioning is successful, and they are waiting for trial production to embroider garments.
Before Xu Zhenming stepped into the door of the factory, he heard rounds of warm applause.Seeing this, he couldn't help laughing.Don't guess, these two large computerized embroidery machines have been successfully debugged and are in trial production.Thinking of this, he quickened his pace and walked into the gate of the light factory.
"The computerized embroidery machine produced by our company is fast, much better than the imported one from our old factory!"
"Yiming produces, it must be a boutique! Haha..."
"The computer embroidery machine in the old factory has a high failure rate, often breaks and skips stitches, and cannot compare with the products we developed!"
At this time, the technicians involved in the research and development all laughed loudly.
They all pointed, walking around in front of the two large embroidery machines, venting their inner excitement.
Wu Yan, Zhao Lan and other sales staff are busy taking pictures of two computerized embroidery machines.These people still have the task of adding pictures of 64-head and 128-head computerized embroidery machines into the data.
In the workshop, these two large-scale computerized embroidery machines lined up with a length of tens of meters, spraying 15-color "YM" patterns at high speed.On the white plexiglass work surface, the lined towels and Yiming company work clothes have been embroidered with LOGO patterns.
The pattern is neat and there are no thread burrs.This situation shows that the performance of the 64-head and 128-head computerized embroidery machines is very stable, and there is no thread breakage or skipped stitches!
Seeing this situation, Xu Zhenming smiled and nodded.
Yiming has developed to this day and finally has a decent product.These two large-scale computerized embroidery machines are unique today, and there are only these two products in the world.This kind of technology will not appear until more than ten years later!
Moreover, only these two large-scale computerized embroidery machines can be regarded as important intelligent equipment in the textile and apparel industry, and they will not be eliminated after more than 20 years.
"Boss Xiao Xu! Now that the two large-scale computerized embroidery machines have been successfully developed, shall we start production immediately?"
At this time, Sun Ziliang, who was visiting, walked to Xu Zhenming's side with a smile, congratulated Xu Zhenming, and made suggestions to Xu Zhenming.He still maintains the old idea that if the product is good, it can be mass produced.This concept is different from the market economy concept of order-based production, and it is out of date.
Hearing his question, Wu Yan, Zhao Lan and others who were standing nearby cast questioning eyes.The two of them are engaged in sales, and of course hope that the company can produce some large-scale computerized embroidery machines to facilitate their sales work.
"No! The cost of this large-scale computerized embroidery machine is too high, and it can only be produced on order! Moreover, ordinary enterprises cannot afford this large-scale equipment, and it is estimated that they will not be able to sell a few sets a year!"
Looking at the faces of everyone, Xu Zhenming smiled and answered Sun Ziliang's question.
Fatty Zhang Gui is the product manager, and he is most concerned about the sales volume of his products.When he heard that this kind of large-scale computerized embroidery machine was not easy to sell, he couldn't help asking Xu Zhenming with disappointment: "Then why should we be thankless to develop such a product without a market?"
"We want to use this large-scale equipment to prove our strength! Let customers rest assured! Then they will pay for domestic products and buy our small computerized embroidery machine!"
Xu Zhenming explained the plan in his mind to everyone.Although he doesn't understand marketing, the truth in his words contains a marketing strategy.
Wu Yan heard the meaning of Xu Zhenming's words, and a strange light gleamed in her big pretty eyes.Her cheeks flushed slightly, and she peeked at Xu Zhenming standing in the crowd from time to time.
At this time, Xu Zhenming began to arrange tasks.
He arranged for Li Quan and Zhang Gui to be responsible for the aging of these two large computerized embroidery machines without stopping the machine 24 hours a day.On January 12, five small computerized embroidery machines and two large computerized embroidery machines must be packaged and shipped directly to the Modu International Convention and Exhibition Center.
Wu Yan's task is also very heavy. She is responsible for preparing Yiming's promotional materials, advertising color pages for computer embroidery machines, and arranging various exhibits for trade fairs... etc.
The boss gave an order and the employees ran off!
After receiving Xu Zhenming's order, the technicians and sales staff at the scene reduced their smiles and started to get busy.
Wu Yan also deliberately pursed her red lips and murmured, "Mr. Xu regards me as a scalper. He has arranged so many tasks at once and can't remember it. How can I finish it!"
She was deliberately saying something to complain, trying to get Xu Zhenming's attention.
After Xu Zhenming gave an order, he left the light-duty factory and prepared to hold a technical seminar.
The fat man was attracted by Wu Yan's complaints, and said with a smile of hippie: "Dame Wu! If you are too busy, just say hello, and the niche is on call!"
"Fuck you! You are too busy with your own affairs, and are you still thinking about helping grandma and aunt?"
Wu Yan stunned the fat man, twisting his beautiful waist and left.
There was bursts of laughter in the light factory.
